Chevrolet 2014 Silverado 2500HD Owner's Manual page 453

Warning
Fans or other moving engine
parts can injure you badly. Keep
your hands away from moving
parts once the engine is running.
6. Check that the jumper cables do
not have loose or missing
insulation. If they do, you could
get a shock. The vehicles could
be damaged too.
Before you connect the cables,
here are some basic things you
should know. Positive (+) will go
to positive (+) or to a remote
positive (+) terminal if the vehicle
has one. Negative ( ) will go to a
heavy, unpainted metal engine
part or to a remote negative ( )
terminal if the vehicle has one.
Do not connect positive (+) to
negative ( ) or you will get a
short that would damage the
battery and maybe other parts
too. And do not connect the
negative ( ) cable to the
negative ( ) terminal on the dead
battery because this can cause
sparks.
5.3L Engine (4.3L, 4.8L, 6.0L, 6.2L
and 6.6L Similar)
7. Connect the red positive (+)
cable to the positive (+) terminal
of the vehicle with the dead
battery.
8. Do not let the other end touch
metal. Connect it to the
positive (+) terminal of the good
Vehicle Care
battery. Use a remote
positive (+) terminal if the vehicle
has one.
9. Now connect the black
negative ( ) cable to the
negative ( ) terminal of the good
battery. Use a remote
negative ( ) terminal if the
vehicle has one.
Do not let the other end touch
anything until the next step.
10. Connect the other end of the
negative ( ) cable to a heavy,
unpainted metal engine part or
to the remote negative ( )
terminal, on the vehicle with
the dead battery.
11. Start the vehicle with the good
battery and run the engine for a
while.
12. Try to start the vehicle that had
the dead battery. If it will not
start after a few tries, it
probably needs service.
10-87