Taillamps, Turn Signal; Stoplamps, And Back-Up; Lamps; Center High-Mounted - Chevrolet 2014 Silverado 2500HD Owner's Manual

4. Install a new bulb into the
socket, turn it clockwise, and
press it in until it is tight.
5. Reinstall the lens and the four
screws.

Taillamps, Turn Signal,

Stoplamps, and Back-Up

Lamps

A. Stoplamp/Taillamp/Turn
Signal Lamp
B. Back-up Lamp
To replace one of these bulbs:
1. Open the tailgate. See Tailgate
on page 2-9 for more
information.
2. Remove the two rear lamp
assembly screws near the
tailgate latch strikerpost and pull
rearward until disengaging the
two outer pins on the taillamp
assembly from the vehicle.
3. Turn the bulb socket
counterclockwise to remove it
from the taillamp assembly.
Vehicle Care
4. Pull the old bulb straight out
from the socket.
5. Press a new bulb into the socket
and turn the socket clockwise
into the taillamp assembly.
6. Reinstall the taillamp assembly.

Center High-Mounted

Stoplamp (CHMSL) and
Cargo Lamp
A. Cargo Lamp
B. Center High-Mounted Stoplamp
(CHMSL) Bulb
10-37