IMPORTANT SAFEGUARDS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. GRAPHIC SYMBOL EXPLANATION The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage"...
Page 3
CAUTION Do not drop or strike this equipment. Sensitive electronics inside are vulnerable to excessive shock. Do not install the equipment near any naked flames or heat sources. Excessive heat could damage this unit. Do not expose this unit to rain or excessive moisture, avoid smoke and dust.
Page 4
CONGRATULATIONS Thank you for purchasing this D/N ATR 700TVL Camera. You now own one of the many fine CCTV products we manufactured. This product has been carefully inspected under rigid quality control and should reach you in perfect condition. With reasonable care, it will provide years of reliable performance.
WARRANTY INFORMATION Please complete the following product purchase information. The factory will requests this information when contacted for technical support, or warranty repair. It is also valuable in case of loss or theft. Purchase Date : Serial Number : Model Number :...
TABLE OF CONTENTS FEATURES PART DESCRIPTION INSTALLATION CONFIGURATION OF THE MENU SETTING MENU AND FUNCTIONS To Open and Exit the Menu screen LENS SHUTTER/AGC WHITE BAL (White Balance) BACKLIGHT (Backlight Compensation) PICT ADJUST (Picture Adjust) ...
FEATURES The CMG1086/1088 series Day&Night Adaptive Tone Reproduction 700TV Lines Resolution Camera introduces supremacy in video quality. This compact yet full functional color DSP camera use high sensitive 1/3" Exview HAD interline transfer CCD. The camera achieves superb quality color images at 700TV lines resolution.
Page 8
DAY&NIGHT(IR CUT REMOVABLE) The camera automatically identifies when it is either day or night time and switched accordingly. During daylight the camera will switch to color to obtain excellent image clarity, while at night the camera will switch to monochrome to obtain improved picture definition.
Page 10
POWER SHUTTER AUDIO SYNC D / N VIDEO D/N EXT D/N EXT AC24V / DC12V CMG1086 POWER SHUTTER AUDIO SYNC D / N VIDEO D/N EXT AC100~240V CMG1088...
Page 11
LENS MOUNT CAP Prevent damages to the image sensor and to keep dust away. FOCAL LENGTH ADJUSTMENT RING AND LOCKING SCREW Use this ring to adjusts the back-focal distance or picture focus. Rotate this ring clockwise or counterclockwise for a CS-mount lens. Use the locking screw to lock the focal length.
Page 12
VIDEO OUTPUT CONNECTOR Composite video signal output. USER OSD SETTING Setting switches and Functions. (UP) : Press to move the cursor upwards or to select items. LEFT RIGHT S E T (LEFT) : Press to move the cursor to the left ...
Page 13
2. D/N EXT & GND The camera will be triggered to switch between DAY(Color) or NIGHT (Monochrome) mode by external device. DAY Mode ● When you supply the HIGH(+3V~+5V) Potential, the DAY/NIGHT function is set to DAY mode. ...
Page 14
Sets the SHUTTER SELECTION SWITCH: SHUTTER SELECTION SWITCH SHUTTER SPEED 1/60sec.(1/50sec.) ~ 1/100,000sec. 1/100sec.(1/120sec.) 1/150sec. 1/200sec. 1/250sec. 1/300sec. 1/350sec. 1/400sec. 1/450sec. AC24V/DC12V COMPATIBLE INPUT TERMINAL AC24V(AC24V 10%) or DC12V(DC12V 10%, Non-Polarity input) power input. ± ± AC INPUT AC(AC100~240V) power input.
INSTALLATION SUITABLE LENSES The lens must be either a C or CS mount type. The protrusion behind the mounting surface must be within the following limits: C - mount lens CS - mount lens 9mm or less 4mm or less...
Page 16
FITTING THE LENS Remove the lens mount cap. Screw in the C mount ring(not supplied), until it is secured. When using a CS mount lens skip step2. Screw in the lens, until it is secured. Insert the lens plug in the AUTO IRIS connector, when fitting a manual- iris lens, skip step4.
Page 17
FITTING THE CAMERA 1. The mounting hole on the top or bottom of the camera. 2. Tighten the screw to the mounting hole. Please refer to the following drawing. CONNECTION OF POWER SUPPLY CABLE (AC24V or DC12V) Connect to the power supply. Please refer to the right drawing.
CONFIGURATION OF THE MENU SETUP LENS AUTO TYPE DC/VIDEO - MENU MANUAL MODE AUTO O P E N C L O S E - SPEED(000~255) SHUTTER/ AUTO HIGH LUMINANCE MODE AUTO IRIS/SHUT+AUTO IRIS (NOTES 1) * SHUT(NOTES * BRIGHTNESS(000~255) LOW LUMINANCE MODE AGCOFF -...
Page 19
MOTION DET DETECT SENSE(000~127) BLOCK DISP OFF/ON/ENABLE - MONITOR AREA OFF/ON - AREA SEL 1/4~4/4 - [000~244(NTSC), 000~288(PAL)] BOTTOM [000~244(NTSC), 000~288(PAL)] LEFT [000~474(NTSC), 000~468(PAL)] RIGHT [000~474(NTSC), 000~468(PAL)] PRIVACY AREA SEL 1/8~8/8 - [000~244(NTSC), 000~288(PAL)] BOTTOM [000~244(NTSC), 000~288(PAL)] LEFT [000~474(NTSC), 000~468(PAL)] RIGHT [000~474(NTSC), 000~468(PAL)] COLOR(1~8) TRANSP 0.00 0 .
SETTING MENU AND FUNCTIONS TO Open and Exit the Menu screen 1. Press "SET" button. The Menu screen appears on the monitor. Check the current settings on the menu. 2. Push or button to select the options then use o r button to select a ...
AUTO (AUTO IRIS) FUNCTION OPTION DESCRIPTION T Y P E Sets the type of mechanical iris. VIDEO DC: Direct drive signal. VIDEO: Video drive signal. MODE AUTO Sets the type of control to be exercised over OPEN the mechanical iris. CLOSE AUTO: The mechanical iris is controlled automatically.
Page 22
AUTO: Select the AE control. MANUAL: Select the ME control. AUTO (AE) FUNCTION OPTION DESCRIPTION HIGH MODE AUTO IRIS 1. Set the LENS mode to AUTO on the LUMINANCE SHUT+AUTO IRIS SETUP MENU menu. 2. Specifies AE control on the medium and high brightness side.
Page 23
MANUAL (ME) MANUAL SETUP MODE SHUT+AGC SHUTTER 1/60 6.00 RETURN FUNCTION OPTION DESCRIPTION MODE SHUT+AGC "SHUT+AGC" is the only option available for the ME operation mode. There are no other options. SHUTTER 1/60(NTSC), 1/50(PAL) Sets the ME shutter speed(in fractions 1/100(NTSC), 1/120(PAL) of a second).
WHITE BAL (WHITE BALANCE) This function is used to set the white balance operation mode. 1. Select [WHITE BAL] option. 2. Push o r button to select a mode. SPEED WHITE BAL mode changes as follows: DELAY CNT ATW FRAME x1.00 PUSH...
Page 25
USER1 WB USER2 WB B-GAIN B-GAIN R-GAIN R-GAIN RETURN RETURN USER1 The gain values for the outdoor fixed mode are used as the adjustment items of USER1 on the internal OSD menu. USER2 The gain values for the fluorescent light fixed mode are used as the adjustment items of USER2 on the internal OSD menu.
MANUAL WB LEVEL RETURN FUNCTION O P T I O N DESCRIPTION LEVEL 0 0 0 ~ 2 5 5 Sets the B and R gain values for manual WB. By incrementing or decrementing the B gain value, the R gain value is also adjusted in tandem.
BACKLGIHT mode changes as follows: → → BLC: Backlight compensation ON. HLC: HLC(High Light Compensation) function ON. HLC is a function that improves the visual recognition of license plates and other such objects by suppressing or masking strong hight ...
ATR (Adaptive Tone Reproduction) The ATR(Adaptive Tone Reproduction) function provides gradation compensation to improve the contrast of subjects whose gradation has been lost in cases where, for instance, both low-louminance areas and high- luminance areas exist in the same picture. 1.
Page 29
MOTION DEL DETECT SENSE BLOCK DISP MONITOR AREA AREA SEL BOTTOM LEFT RIGHT RETURN FUNCTION OPTION DESCRIPTION DETECT SENSE 000~127 Sets the motion detection Sensitivity. BLOCK DISP Controls the ON/OFF status of the motion detection block display. ENABLE OFF: No block display. ON: Block display.
PRIVACY This function is used to set up to eight privacy masks. 1. Select [PRIVACY] option. 2. Push o r button to select a ON and press "SET" button. The PRIVACY menu appears. 3. Push o r button to select a mode or set the mask frame position. ...
DAY/NIGHT This function is used to set the DAY/NIGHT function. 1. Select [DAY/NIGHT] option. DAY/NIGHT 2. Push or button to select a mode. BURST O F F DELAY CNT DAY/NIGHT mode changes as follows: DAY NIGHT → AUTO COLOR →...
BURST O F F RETURN FUNCTION OPTION DESCRIPTION BURST Selects whether to output the burst signal when the B/W(NIGHT mode established forcibly) status has been identified. OFF: Burst signal OFF enable. ON: Burst signal ON. NR (Noise Reduction) This function is used to set the noise reduction. 1.
CAMERA ID This function is used to set the camera ID. 1. Select [CAMERA ID] option. 2. Use o r button to select a ON and press "SET" button. The CAMERA ID menu appears. CAMERA ID CAMERA ID 大門廳走道倉庫口安全樓梯園電巷路區室地防火左...
1. Select [SYNC] option. 2. First, sets the SYNCHRONIZATION SELECTION SWITCH to "INT" (Please refer to page 5.). Then push or button to select a INT. 3. Perhaps sets the SYNCHRONIZATION SELECTION SWITCH to "LL" (Please refer to page 5.). Then push or button to select a LL and press ...
CAMERA RESET This function is initializes all the internal OSD menu setting together. 1. Select [CAMERA RESET] option. 2. Press "SET" button to reset the camera setting to initial setting. 3. Select [SAVE ALL] option on the [SETUP MENU] menu. Press "SET"...
SPECIFICATIONS D/N ATR 700TVL CAMERA Model No. CMG1086N/P CMG1088N/P DC12V 10% ± Power Input Voltage AC100~240V AC24V 10% ± System NTSC or PAL Pick Up Element 1/3" Exview HAD CCD Sensor 976(H) x 494(V) [NTSC] Effective Pixels 976(H) x 582(V) [PAL] Chip Size 5.58mm(H) x 4.67mm(V) Horizontal &...