Table of Contents
Advertisement
2.9 Remove the MB-LCD connector & loosen the 4 screws on PCB holder . (Figure 13)
2.10 Separate the PCB holder & panel . (Figure 14)
Figure 13
2.11 Loosen the 4 screws on the sides of panel (Figure 15)
2.12 Remove the front bezel & panel (Figure 16)
2.13 Remove the 4 hexagon screws beside the DVI & D-sub connector . (Figure 17)
2.14 Remove the screws which fixed the power board & Mainboard (Figure 18)
Figure 17
ViewSonic Corporation
Screws
Figure 15
Figure 14
Figure 16
Figure 18
41
Confidential - Do Not Copy
VX912-4
Advertisement
Table of Contents
