OSD and Power Lock Settings ... 7 Adjusting the Screen Image ... 8 Main Menu Controls ... 10 Other Information Specifications ... 14 Troubleshooting... 15 Customer Support ... 16 Cleaning the LCD Display ... 17 Limited Warranty ... 18 ViewSonic VX912...
CE Conformity for European Countries CE Conformity The device complies with the requirements of the EEC directive 89/336/EEC as amended by 92/31/EEC and 93/68/EEC Art.5 with regard to “Electromagnetic compatibility,” and 73/23/EEC as amended by 93/68/EEC Art.13 with regard to “Safety.” ViewSonic VX912...
NERGY ® Disclaimer: ViewSonic Corporation shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages resulting from furnishing this material, or the performance or use of this product.
PDF files and INF/ICM display optimization files. The INF file ensures compatibility with Windows operating systems, and the ICM file (Image Color Matching) ensures accurate on- screen colors. ViewSonic recommends that you install both files. Precautions • Sit at least 18” from your LCD display.
NOTE: Windows users may receive a message asking them to install the INF file. This is on the CD. 5. Insert the ViewSonic Wizard CD into the computers CD drive. Follow the on-screen instructions. If your computer does not have a CD-ROM drive, see “Customer Support”...
Installation of Wall Mount (Optional) To obtain a wall-mounting kit, contact ViewSonic or your local dealer. Refer to the instructions that come with the base mounting kit. To convert your LCD display from a desk-mounted to a wall-mounted display, do the following: 1.
Power Button Locked will display for few seconds. With or without this setting, after a power failure, your LCD display’s power will automatically turn ON when power is restored. • Power Button Unlock: Press and hold [1] and the down arrow again for 10 seconds. ViewSonic VX912...
“Main Menu Controls” on page 10. Displays the Main Menu or exits the control screen and saves adjustments. ViewSonic VX912 Main Menu with OnView controls Front Control Panel shown below in detail Scrolls through menu options and adjusts the displayed control.
Page 11
(The black border around the edge of the screen should barely touch the illuminated “active area” of the LCD display.) ViewSonic VX912 The line at the bottom of the screen tells you what you can do next: Exit or select the...
9300K-Adds blue to the screen image for cooler white (used in most office settings with fluorescent lighting). 6500K-Adds red to the screen image for warmer white and richer red. 5400K-Adds green to the screen image for a darker color. ViewSonic VX912...
Page 13
Information displays the timing mode (video signal input) coming from the graphics card in your computer, the LCD model number, the serial number, and the ViewSonic website URL. See your graphic cards user guide for instructions on changing the resolution and refresh rate (vertical frequency).
Page 14
Language allows you to choose the language used in the menus and control screens. Resolution Notice displays the Resolution Notice menu shown below. Resolution Notice advises the optimal resolution to use. OSD Position allows you to move the on-screen display menus and control screens. ViewSonic VX912...
Page 15
Memory Recall returns the adjustments back to factory settings if the display is operating in a factory Preset Timing Mode listed in the Specifications of this manual. Exception: This control does not affect changes made with the User Color control, Language and Power Lock setting. ViewSonic VX912...
Preset Timing Mode (pre-adjusted to VESA Warning: Do not set the graphics card in your computer to exceed these refresh rates; doing so may result in permanent damage to the LCD display. Macintosh computers older than G3 require a ViewSonic adapter, contact ViewSonic. ViewSonic VX912 19”...
Loose or broken pins in the cable connector could cause an improper connection. • Connect the LCD display to another computer. • If you have an older graphics card, contact ViewSonic for a non-DDC adapter. Control buttons do not work • Press only one button at a time.
Singapore, Southeast Asia, www.viewsonic.com.sg and India South Africa and www.viewsonic.com other countries Hong Kong www.hk.viewsonic.com ViewSonic VX912 T = Telephone Email F = FAX T= (800) 688 6688 service.us@viewsonic.com F= (909) 468 1202 T= (886) 463 4775 service.ca@viewsonic.com F= (909) 468 1202 T= (0800) 833 648 service.eu@viewsoniceurope.com...
LCD display screen or case. Some chemical cleaners have been reported to damage the screen and/or case of the LCD display. • ViewSonic will not be liable for damage resulting from use of any ammonia or alcohol- based cleaners. ViewSonic VX912...
How long the warranty is effective: ViewSonic LCD displays are warranted for three (3) years for all parts including the light source and three (3) years for all labor from the date of the first consumer purchase. Who the warranty protects: This warranty is valid only for the first consumer purchaser.
Need help?
Do you have a question about the VX912 and is the answer not in the manual?
Questions and answers