Mercedes-Benz 410 D Operating Instructions Manual page 74

Automatic transrrnss,011
1 O,I dra,n plug - trans,niss,on
2
011
drain plug - torque conve, ter
5.5.2.3 Oil and filter chnngc
Change 01 1 11nmL•tlt,1tl'ly 1111 •1 .111
1•xt,.ndPtl
tnp while ,t is still hot and thin.
Draining 011 from tlm 11 1111•. 1111 •,•,1or 1
- Unscrew 011tlr,1111 1 1l11t1
,11111
t lr.1111 011
Draining
OIi
from lilt •
IOI
qui•
I llllVl'l l{!I
- Rotate torque co 11 v t•1t1>1 1111111
t111•
drain plug in the opening of the torque
converter hous111~1 lJ1• c or11,.., v1~1l)le
- Unscrew drain pluq .mcl 1ltt1111 011
- Renew sealing nnq s
- Screw in and tighten ml p1u11
Observe t1gt1ten111q to,
qui'
Filter change:
- Detach oil pan ancl 1.IP,lll
- Renew filter.
- Check oil pan gaskPt for clwnage and renew if required. Attach oil pan.
Observe tighten1119 to ,qut>s
Filling with oil:
Use special tool or a funnel with fine-mesh strainer.
- First pour 1n approx 4 illPr s of 011 through the oil filler pipe.
- Start engine and run 11 al 1clle.
- Pour in the rest of
tt,e
011 while the engine 1s running.
- Shift selector lever tl11 ougl1 all positions and return it to position .,P".
- Inspect 011 level while the engine ,s operating. Add oi l, if necessary.
- Check transmission and lines for leaks .
73