Sharp CD-E700 Service Manual page 13

Standard Specification of Stereo System Error Message Display Contents
Error Contents
CD Pickup Mechanism Error.
CD Changer Mechanism Error.
CD DSP Communication Error
Focus Not Match.
TUN PLL Unlock.
(*) CHECKING:
If CD changer mechanism error is detected, 'CHECKING' will be display instead of 'ER-CD**' display 'ER-CD**' will only be display
when CD changer mechanism error had been detected for the 5 th times.
Speaker abnormal detection and +B PROTECTION display
In case speaker abnormal detection or +B PROTECTION had occured, it can be check by pressing 'POWER', 'VIDEO' and 'X-
BASS' key twice. Display will show "S** B**". S is referring to speaker abnormal detection and B is referring to +B PROTECTION.
** is in hex valve.
+B PROTECTION is condition when irregular process occur on power supply line.
BEFORE TRANSPORTING THE UNIT
The following process need to be taken after set tapering/parts replacement.
1. Press the Power On Button to enter Powre mode.
2. While pressing down the
3. While pressing down the
"FINISHED" appears.
4. Unplug the AC cord and the unit is ready for transporting.
DISPLAY
'ER-CD**'
'ER-CD**'
(*)
'ER-CD**'
'NO DISC'
FM 87.5 MHz
button and the X-Bass/Demo button, press the Power button until "CLEAR AL" appears
button and the X-Bass/Demo button , press the Power button until "WAIT"
01: PU-IN SW Detection NG.
10: Changer Error.
11: Initial Error.
31: DSP COMMUNICATION ERROR
PLL Unlock.
– 13 –
CD-E700/CD-E77
Notes