Safety Information - Beamz 150.446 Instruction Manual

Congratulations to the purchase of this Beamz LED Moving Head. Please read this manual thoroughly
prior to using the unit in order to benefit fully from all features.
Read the manual prior to using the unit. Follow the instructions in order not to invalidate the
warranty. Take all precautions to avoid fire and/or electrical shock. Repairs must only be carried
out by a qualified technician in order to avoid electrical shock. Keep the manual for future
reference.

SAFETY INFORMATION

- Keep the original packing material so that you can
transport the unit in safe conditions.
- Prior to using the unit, please ask advice from a
specialist. When the unit is switched on for the first
time, some smell may occur. This is normal and will
disappear after a while.
- The unit contains voltage carrying parts. Therefore do
NOT open the housing.
- Do not place metal objects or pour liquids into the
moving head. This may cause electrical shock and
malfunction.
- Do not place the unit near heat sources such as radiators,
etc. Do not place the unit on a vibrating surface. Do not
cover the ventilation holes.
- The unit is not suitable for continuous use.
- Be careful with the mains lead and do not damage it. A
faulty or damaged mains lead can cause electrical shock
and malfunction.
- When unplugging the unit from a mains outlet, always
pull the plug, never the lead.
- To avoid fire and shock hazard, do not expose the unit to
rain and moisture.
- Do not plug or unplug the unit with wet hands.
- If the plug and/or the mains lead are damaged, they need
to be replaced by a qualified technician.
- If the unit is damaged to such an extent that internal
parts are visible, do NOT plug the unit into a mains
outlet and DO NOT switch the unit on. Contact your
dealer. Do NOT connect the unit to a dimmer.
- All repairs should be carried out by a qualified
technician only.
- Connect the unit to an earthed mains outlet
(230Vac/50Hz) protected by a 10-16A fuse.
- During a thunderstorm or if the unit will not be used for
a longer period of time, unplug it from the mains. The
rule is: Unplug it from the mains when not in use.
- If the unit has not been used for a longer period of time,
condensation may occur. Let the unit reach room
temperature before you switch it on. Never use the unit
in humid rooms or outdoors.
- During operation, the housing becomes very hot. Do not
touch it during operation and immediately after.
This mark attracts the attention of the user to high voltages that are present inside the housing and
that are of sufficient magnitude to cause a shock hazard.
This mark attracts the attention of the user to important instructions that are contained in the manual
and that he should read and adhere to.
GB
- To prevent accidents in companies, you must follow the
applicable guide lines and follow the
instructions/warnings.
- Secure the unit with an extra safety chain if the unit is
ceiling mount. Use a truss system with clamps. Make
sure nobody stands in the mounting area. Mount the
moving head at least 50cm away from inflammable
material and leave at least 1 meter space on every side to
ensure sufficient cooling.
- This unit contains one high intensity LED. Do not look
into the LED light to prevent damage to your eyes.
- Do not switch the unit on when no LED tube (lamp) is
fitted. Do not repeatedly switch the lamp on and off.
This shortens the life time of the lamp.
- Keep the unit out of the reach of children. Do not leave
the unit unattended.
- Do not use cleaning sprays to clean the switches. The
residues of these sprays cause deposits of dust and
grease. In case of malfunction, always seek advice from
a specialist.
- Only operate the unit with clean hands.
- Do not force the controls.
- If the unit has fallen, always have it checked by a
qualified technician before you switch the unit on again.
- Do not use chemicals to clean the unit. They damage the
varnish. Only clean the unit with a dry cloth.
- Keep away from electronic equipment that may cause
interference.
- Only use original spares for repairs, otherwise serious
damage and/or dangerous radiation may occur.
- Switch the unit off prior to unplugging it from the mains
and/or other equipment. Unplug all leads and cables
prior to moving the unit.
- Make sure that the mains lead cannot be damaged when
people walk on it. Check the mains lead before every
use for damages and faults!
- In Great Britain, the mains voltage is 240Vac/50Hz. If
you travel with your unit, make sure that the mains
voltage of the country is suitable for this unit