Table of Contents
Advertisement
Proper use of freezers
Thermostat
Connect the freezer to power supply and " Power"
indicator will shine, " ALARM" indicator light when the
inside temperature is too high. Please note that
POWER is green light and ALARM is red light.
The temperature of the chamber is adjusted through the
thermostat knob. The number "1, 2, 3, 4, 5, 6," do not
mean a specific temperatures, the lower the number is,
the higher the temperature inside will be and verse versa.
The user can choose the right temperature zone
according to their needs.
OFF
stands for inoperation.
"
"
Placement
Start
Before using the freezer,
remove all packaging
materials including bottom
cushions and foam pads
and tapes inside the freezer,
tear off the protective film
on the door and the freezer
body.
Keep away from heat and
avoid direct sunlight. Do not
place the freezer in moist or
watery places to prevent rust
or reduction of insulating
effect.
The freezer shall stay for half an hour before connecting
220~240V/50Hz power when it is firstly started.
The freezer shall run 2 to 3 hours before loading fresh or
frozen foods; the freezer shall run for more than 4 hours in
summer in advance considering that the ambient
temperature is high.
14
5
4
Power
Alarm
The freezer is placed in a
well-ventilated indoor place;
the ground shall be flat, and
sturdy .
The top space of the freezer
shall be greater than 70cm, and
the distances from both sides
and backside shall be more than
20cm to facilitate the opening
and closing and heat dissipation.
Wipe the freezer inside and
outside with warm moist rag
(add a small amount of detergent
in the warm water and wipe clean
finally with clean water).
6
OFF
1
2
3
English
Advertisement
Table of Contents
