Remove Two Pieces Of - Toshiba D-R1SU Service Manual

1-2-4. Front (R), Front (L) and Jack PC Board
(1) Remove the top cover. (Refer to item 1-1-1.)
(2) Remove front panel. (Refer to item 1-1-2.)
(3) Remove two pieces of tape (1).
(4) Remove six screws (2), four claws and the stay (3).
(5) Remove three screws (4) to remove the front (R) PC board (5).
(6) Remove two screws (6) to remove the front (L) PC board (7).
(7) Remove four screws (8) to remove the jack PC board (9).
(Note)
After replacing, tape on two points (1) as they were.
Stay (3)
Front (L) board (7)
Screws (8)
Jack PC board (9)
Tape (1)
Screws (2)
Screws (6)
Tape (1)
Claws
Screws (4)
Claws
Front (R) board (5)
Fig. 2-1-10