Table of Contents
8 | EN
9
9
10
10
10
12
12
12
12
13
Turning On and Off
13
Your On/Off switch is your viewfinder. To
13
turn on your Snap, gently press the power
13
icon on the viewfinder. Your viewfinder will
pop up and your camera will turn on.
14
Turning Off
14
- Use slight pressure to push the viewfinder
16
back to a closed position. Your camera is
17
now off.
Restarting
- To manually restart (in case of the camera
Using Your Snap
freezing or other issues), first insert the
end of a paperclip or other small, pointed
item into the pinhole next to the micro USB
slot. Apply gentle pressure until the camera
turns off. Close and open the viewfinder to
turn the camera back on.
Firmware Update
For best results, update the Snap firmware
before you start snapping and printing.
Go to www.polaroidsnapcamera.com/
firmware_update to take care of this quick
and easy update. SD card is required.
EN | 9