Contents Before using your machine for Care and cleaning the first time Cleaning the lint filter Do not tumble-dry Cleaning the outside of the Safety instructions machine Installation Troubleshooting Safety The machine will not start Interrupting a programme Overheating cut-out Packing material Drying takes too long Recycling...
Before using your machine for the first time Do not tumble-dry Certain materials are not suitable for tumble-drying. Always check and follow the instructions on each item's laundry label. You can find more information in the chapter "Advice and tips before you tumble-dry". Note! When starting the tumble dryer for the first time or after a long period without use, you may...
Safety instructions • Do not install the dryer behind doors with lock, Read the operating instructions and sliding doors or next to the doors with hinges keep them in a safe place! so that opening of the dryer door will never be hindered.
Safety instructions Recycling This machine is manufactured and labelled for recycling. In order to prevent injuries, the machine must be made unusable once the decision has been taken to dispose of it. Contact your local authority for information about where and how your machine can be recycled correctly.
Child safety General Activating/deactivating Child-safe start Do not allow children to play with the Do as follows to open the settings menu: 1. Turn off the machine using the main power tumble dryer. switch. The tumble dryer does not start automatically 2.
Advice and tips before you tumble-dry Here are some tips that may help you before you Materials that must not be begin tumble-drying. tumble-dried Have the clothes been spun? This symbol means that the material is not Items to be tumble-dried should be spun at 1000 suitable for tumble-drying.
Tumble drying Below are step-by-step instructions to help you Auto dry (low temperature) achieve the best possible tumble-drying results. These programmes shut off the heat once the Sort your fabrics load is dry but before it is "over dry". The Auto dry You will achieve the most uniform drying programme shuts off the heat slightly later than results if the items are made of the same...
Page 11
Tumble drying Programme chart Here we present a few examples of the energy and time consumption of a few different programme settings. Consumption can vary according to room temperature, humidity, load, variations in the power supply and selected options For the consumption values given below, the requirements are as follows: Temperature of intake air: 23°C Moisture content of intake air:...
Tumble drying Press the Start button Drying programme finished Remaining drying time The text "End" appears on the display when the programme is finished. An estimate of the remaining drying time Backlighting will be shown on the display a few minutes after the drying programme starts.
Settings How to choose the settings: • Language • Child-safe • Audible Volume • Element 2 Do as follows to open the settings menu: 1. Turn off the machine using the main power switch. 2. Press the Stopbutton and switch on the machine with the main power switch. Then press the Stopbutton 5 times within 10 seconds.
Care and cleaning Cleaning the lint filter Cleaning the outside of the machine If the display reads "Insert filter" the tumble dryer Clean the outside of the machine and the will not start. Insert the lint filter in its holder. programme panel with a mild cleaner.
Troubleshooting The machine will not start Drying takes too long • Check that the lint filter is not clogged (see the Check "Care and cleaning" chapter). • that the door is properly closed. • that the main power switch is on. The washing does not dry, or is too •...
Service Before contacting the service Model designation division Type plate Before contacting the service division, you should find out whether you can resolve the fault yourself. See the "Troubleshooting" and "Care and cleaning" chapters. If you still need to contact the service division, make sure that you know the model designation, type designation and serial number.
Installation How to assemble the stack: Positioning the tumble dryer 1. Undo the anti-tilt device. The tumble dryer can be free-standing or in a stack. Remember that the tumble dryer produces heat and should therefore not be located in a room that is too small.
Installation 5. Fit the plastic cups so that the “tags” marked Adjusting the feet with arrows are against the front edge or side Screw the feet in or out so that the tumble dryer edge of the cover and press them firmly onto is steady and balanced on the floor or on the the cover.
Page 20
Installation Connection to the evacuation duct Installation in a hot environment The vent hose must take the shortest and If you install the tumble dryer in a small room with straightest route possible from the tumble dryer a high atmospheric humidity, where the to the evacuation duct.
Installation Accessories Electrical installation If the vent hose runs to an outlet in the wall, you The electrical connection must be made using a can prevent the inflow of cold air by fitting a cable for permanent installation, with a multipolar ventilation grill.
Door hanging You can choose whether the door is hung on the (magnetic lock) in place. Then use a flat-bladed right or the left. screwdriver to remove the cover plate. Refit the catch (magnetic lock) and the cover plate Follow these instructions: on the other side.
Quick guide Fabrics Select a programme and any • Dry fabrics of the same type together to options ensure that they dry as evenly as • Turn the programme selector to the possible. required programme. • Select any options and settings. Turn on the main power switch Press the Start button Load the garments...