Panasonic Hi-Fi) Operating Instructions Manual page 5

Stand-by/on switch
Press to switch the unit from on to stand-by mode or vice
versa. In stand-by mode, the unit is still consuming a small
amount of power.
EXT LINK
Activates the recording timer for externally
controlled recording.
Toggles between TV reception and video playback
AV LINK
TV ASPECT channel.
Changes the screen format.
TV/TEXT
Toggles between TV reception and video text
reception.
Selects a programme memory location and inputs
the ShowView number. Example: 18=
Selects the TV set's AV port.
TRACKING/V-LOCK
Channel selector
CH
Tracking control of disturbed VCR image.
Volume control.
INPUT SELECT
Toggles between AV inputs A1, A2 and A3.
Finds the start of a programme.
ShowView
Displays the ShowView menu.
PROG PLAY
Plays back programmed recordings.
/I
AUDIO
VCR
Audio mode
TV
REC
VCR
Record
P. 25
VCR TV : Selects the AV input and navigates in
the
CH
CH
VCR: Menu entries.
TV
PROG/CHECK
TV
Displays the Timer menu.
VPS/PDC
Controls the beginning and end of a recording
VCR
TV
session by a special signal.
SP/LP/EP
TV
Sets the tape speed.
TIMER
VCR
Activates the recording timer.
TV
I-TIMER Defines programmes transmitted to the same
TV
programme memory location at the same time.
OFF TIMER
Switches the unit into stand-by mode after the
VCR
set time of recording, playback or in Stop mode.
OSD/DISPLAY
Press the button repeatedly to display the time,
VCR
tape counter or remaining tape.
P. 16
RESET/CANCEL
RESET :
VCR
P. 14
CANCEL:
VCR
VCR / TV switch
P. 13
teletext menu.
Resets the counter to 0:00.00.
Clears an entry you made.
VCR
P. 16
VCR
P. 10
VCR
TV
VCR
P. 12
VCR
P. 11
VCR
P. 10
VCR
P. 12
VCR
P. 15
VCR
P. 17
VCR
P. 10
VCR
VCR
TV
5