Recording - Panasonic Hi-Fi) Operating Instructions Manual

Recording

VCR
SP
VCR
SP
10
SV120 HV60 HV50 MV15
Set the TV set to the video channel and insert a cassette into the video recorder;
REC
make sure that the cassette's protection tab is still in.
!
Select a channel to record from.
Select the AV channel if you are recording via the 21-pin scart cable.
!
Press REC
!
Press the Stop button
!
To pause recording:
The function will switch itself off after approx. 5 minutes to protect the video heads.
!
To resume recording:
D
Recordings in the S-VHS or S-VHS ET REC mode are supported by the PAL
TV system only. (Only SV120, page 23)
SV120 HV60 HV50 MV15
OSD/DISPLAY Tape remain counter
The display of the video recorder shows: time - counter - tape remain
The start of a cassette is indicated as
!
Press OSD/DISPLAY
SV120 HV60 HV50 MV15
!
SP/LP/EP Prior to starting the recording session, press
SP : normal recording time
LP : double recording time
EP : triple recording time
D
When you play back LP or EP recordings, some cassettes (e.g.
may produce interference. This is not indicative of a malfunction.
to start recording.
to stop recording.
-----
until ' RE' is displayed.
- optimal picture quality
- simple picture quality
- reduced picture quality
.
SP/LP/EP to set the tape speed.
E-300 type)