Silvercrest Z31123 Operation And Safety Notes page 75

= stays on in the LC display.
= The overload has caused a malfunc-
tion of the weighing process.
= Switch the scale off and then on again.
=
= The batteries are too weak. You can-
not bring the scale into use.
= Replace the batteries (see section
"Inserting / replacing batteries").
= The device cannot be switched on.
= The batteries may be spent.
= Exchange the batteries (see section
"Inserting / replacing batteries"). If
the device still cannot be switched on,
please contact the service centre.
Note: This device has delicate electronic
components. Therefore interference may
GB/MT 75