Operating Precautions - NewMar torrey pine 2008 User Manual

IMPORTANT
The TRANS-TORQUE bushing must be re-tightened to re-couple the slide out
gear motor before moving the coach. This will hold the slide out room in place.
The correct torque on the 11/2" TRANS-TORQUE bushing is 110 foot pounds
maximum. The correct torque on the 11/2" TRANS-TORQUE bushing of the K-
900 motor (center shaft motor) is 125 foot pounds maximum.
Slide outs with either the center or end mounted motors can be moved by
pushing the room the full length of its travel in either direction. This method
will require the assistance of at least two people.

Operating Precautions

WARNING
Before extending the slide out, make certain that there is a minimum of five (5)
feet of clear space on the slide out side of the unit. Prior to extending the room,
be sure to unlock the slide out locking arms. Make sure there are no
obstructions either inside or outside the unit that may interfere with the slide out
extension. Tree branches, bushes or telephone poles can cause extensive
damage to the exterior of the unit.
8:6
2008 Torrey Pine Fifth Wheel by Newmar