Installation/Assembly - MC Crypt DJ-60 Instruction Manual

6. Installation/Assembly

The Mc Crypt DJ mixer can be placed on an even surface or it can also be installed in a desk. For this purpose we
have included installation angles and screws.
When setting the device up or installing it in a desk make sure to pay attention to sufficient
ventilation.
Do not place the device on soft surfaces, such as a carpet or a bed etc.
Moreover, the air circulation must not be obstructed by such objects as magazines, table cloths
or the like. This stops the heat dissipation of the product and can lead to overheating (fire
hazard).
Do not drill any additional holes in the mixing desk case and only use the screws included in
delivery for fastening the installation brackets. The device may otherwise be damaged by
screws that are too long and this could impair its safety.
When setting up the device, it is important to pay attention to a secure position and a firm
surface.
A fall of the mixing desk could injure people.
During set up or installation of the device, make sure the connecting cables are neither jammed
nor damaged by sharp edges.
Only place cables in a way so that nobody could fall over them or get caught by them. Risk of
injury.
When selecting a location, make sure it is not exposed to direct, intensive sunlight, vibrations,
dust, heat, cold or humidity.
No devices with strong electric or magnetic fields such as transformers, motors, cordless
phones, radio devices etc. must be in the direct proximity of the mixing desk, since they may
interfere with the mixing desk.
Never place the device on valuable or delicate furniture without suitable protection.
Installation
• Place the device securely on an even surface.
Mounting
• Fasten the installation brackets with the screws included in delivery to the mixer.
• Cut out the opening for the device from the installation surface.
• Screw the device tight with suitable screws.
35