Panasonic PV-DF204 Operating Instructions Manual page 65

• When appears on the screen while a button is being pressed, it means that the
corresponding operation is prohibited by the unit or the disc.
DRC (Dynamic Range
Compression)
OFF:
Normal audio range is selected. (Factory
preset)
ON:
For dynamic sound even at low volume.
This is useful for late-night listening.
[Dolby Digital DVDs only].
Recommended setting
Type of
amplifier to
LPCM
be
(DVD)
connected
No amplifier
is connected
AV amplifier
without
Dolby PCM
Digital/dts
decoder
AV amplifier
including
PCM
Dolby Digital
decoder
AV amplifier
including
Dolby PCM
Digital/dts
decoder
* When connecting an amplifier (with an
1
optical digital input connector) which does
not contain the Dolby Digital or dts decoder,
be sure to select "PCM." If "Bitstream" is
selected, starting DVD play may cause
such a high level of noise as to be harmful
to your ears and damage the speakers.
* 2 When a dts decoder is connected, please
select "Bitstream" in "dts." If "PCM" is
selected, there will be stereo sound.
* When a Dolby Digital decoder is connected,
3
please select "Bitstream" in "Dolby Digital."
If "PCM" is selected, there will be stereo
sound.
Note
• Make settings according to amplifier
connected to optical audio output as shown
in above table.
8 Press ACTION to redisplay DVD
MAIN MENU and go to step 4 to set
up another item. Or, press ACTION
three times to exit.
Dolby
dts
Digital
PCM* PCM*
1 1
Bitstream* 3 PCM
Bitstream* 3 Bitstream* 2
Selecting STILL MODE
DVD-V
Set to reduce jitter in a displayed still picture
or a motion picture.
1 Press ACTION in Stop mode to
display MAIN MENU.
2 Press ▲ ▼◄► to select "DVD."
3 Press SET to display DVD MAIN
MENU.
4 Press ▲ ▼ to select "STILL MODE."
5 Press SET repeatedly for mode.
AUTO:
"FIELD" (Field still) or "FRAME" (Frame
still) is automatically selected during the
still mode. (Factory preset)
Field:
"FIELD" (Field still) is always selected.
This setting will reduce jitter when
compared with "AUTO" on some discs.
Frame:
"FRAME" (Frame still) is always selected.
Some texts and fine patterns will be seen
clearly when compared with "AUTO" on
some discs.
6 Press ACTION twice to exit this
mode.
MAIN MENU
DVD LOCK LANGUAGE
TV CLOCK CH
SELECT: SET:SET
END :ACTION
DVD MAIN MENU
DISC LANGUAGES
AUDIO OUTPUT
STILL MODE :AUTO
TV MODE :4:3 Pan&Scan
SELECT :
SET :SET
END :ACTION
65