Mts Broadcast/Tv Stereo System; Audio Mode For Tv Viewing - Panasonic PV 20DF63 Operating Instructions Manual

MTS Broadcast/TV Stereo System

Equipped with -TV Noise
Reduction for true MTS
reproduction.
-TV Noise Reduction is
required for good stereo separation
and audio fi delity.
is a registered trademark, and
is licensed by Technology
Licensing.
OPEN/CLOSE
FM/TV D V D
DISPLAY
AUDIO ANGLE SUB TITLE
AUDIO
TITLE
S E T
ACTION
PLAY
SKIP
PAUSE STOP
SLOW/SEARCH

Audio Mode for TV Viewing

Press AUDIO to select the desired audio mode as described above.
(Arrow shows selection.)
• Each press of AUDIO will change the audio mode as shown below.
• "SAP" is selected with fi rst press of AUDIO.
< Example >
Press AUDIO
STEREO
SAP
MONO
Press AUDIO
Receivable Broadcast Types
The following are possible audio broadcast types and on-screen
displays. The signal being received is indicated with an "
mark while the selected audio mode is indicated with an arrow.
To change the audio mode for these broadcasts, see the "Audio
Mode for TV Viewing" section below.
Press DISPLAY to display the broadcast signal being
received.
STEREO
SAP
MONO
LIGHT
DSS
CABLE
+
STEREO
SAP
MONO
ADD/DLT
DISPLAY
MENU
STEREO
SAP
MONO
RETURN
+
SKIP
ZOOM
STEREO
SAP
MONO
STEREO
SAP
MONO
Press AUDIO
MTS Stereo and SAP broadcast
CH08
1 2 : 0 0AM
Multi-channel Television Sound Stereo
(main language) and Secondary Audio
Program (sub language) broadcasts
are being received simultaneously.
Select the STEREO or SAP audio
mode.
MTS Stereo broadcast
CH08
1 2 : 0 0AM
Multi-channel Television Sound Stereo
broadcast. Select STEREO audio
mode.
• If stereo broadcast is weak and the
display fl ickers, select MONO audio mode
for possible improvement.
SAP broadcast
CH08
1 2 : 0 0AM
Secondary Audio Program (sub
language). Select SAP audio mode for
the sub language.
MONO broadcast
CH08
1 2 : 0 0AM
Normal monaural sound broadcast.
STEREO
SAP
MONO
"
19 19