Enter Into Test Mode; Enter Into Off Mode - BOSKON BG-520 Series Instruction Manual

Slide the power switch to the ON position to power on the camera and enter into
the ON mode. Before entering into the ON mode, you can adjust the camera the target
monitoring area by laser pointer
After switching on the camera, the motion indication LED (red) will blink for
15s. The 15s is a buffering time before autonomic capturing photos or videos,
e.g. for closing and locking the bottom cover, fixing the camera on a tree and walk
away.
In ON mode, it is unnecessary to use the remote control. The camera will take
pictures or videos automatically according to the default settings or previous custom
settings. The camera has the sound recording function, so the sound will be embedded
in the video clip while capturing a video.
2.4) Enter TEST Mode
Slide the power switch to the TEST position and enter into the TEST mode. In this mode you
can take pictures or video clips like a regular digital camera, or enter the Menu to set up
parameters by remote control.
2.5) Enter OFF Mode
Slide the power switch to OFF position to power off the camera. Off mode allow user to insert
SD ,SIM Card, replace Battery etc. Please note that even in the OFF mode, the camera still
consumes certain power at µA level. Therefore, please remove the battery if the camera will
not be used for a long time
(Cautions: The Power Switch can't be Slide From "OFF" Mode directly to "ON" Mode
or From "ON " Mode to " TEST" Mode. Each time, user should Slide power switch
into "OFF" Mode, then into "Test" Mode and Finally Enter into "ON" Mode)