Downloading The Photos/Videos; Mounting And Positioning The Camera; Faq On Mms Function; Troubleshooting/Faq - BOSKON BG-520 Series Instruction Manual

Table of Contents

4.4) Downloading the photos/Videos

To download your photos/videos to a PC. First make sure the Camera is power switch is in the

"TEST" Mode. Connect the supplied cable to the Camera's USB port. Then connect main USB

port on your computer. Then, the camera will be recognized as a standard " USB Mass storage"

Device.

On all windows OS, the Camera will also be listed as a " Removable Disk" if you open my

computer" window. The camera's photo file are named "PTDC0001.JPG". video file names will

end with ".AVI". you may copy the photos/videos to your hard drive as you would any file-just

copy/paste or drag the file name or Icons to your drive or desktop.

After you've set up the camera's parameters to your personal

preferences. You have to take it outside and slide the power switch to

" ON ". When setting up the camera for scouting game or outdoor

applications. You must make sure to mount it in place correctly and

securely, we recommend mounting the camera on a sturdy tree with

a diameter of 6inch (15cm). (5 meters ) Away from the place to be

monitored, with the camera placed at a height of 5-6.5ft. (1.5-2M).

please also keep in mind that you will get the best results at night when

the subject is within the ideal flash range. No farther than 45' (14m) and no closer than 10' (3m)

from the camera. Besides, The camera can be also mounted on a tripod

Why did it take so long to receive the mms pictures

Check if the signal is stable or if the battery is ran out

why didn't i receive any mms picture ?

Check if you set right mms parameters in mms setup.

Check if the camera has signal

Check if the camera is under Video mode

I was pretty sure the battery was quite low, But I didn't get any test alert. Why ?

Please make sure you didn't install some old batteries in the battery box, if you replace the

present batteries with some used ones in a point before receiving test alert, the camera will

get confused and can't send a text alert later on.

Camera stops taking images or won't take images

1. Check the batteries to make sure that they are new Alkaline or lithium AA batteries.

Please don't install short battery life.

2. Make sure that the camera power switch is in the "ON" position and not in the "OFF" or

"setup" modes.

3. Make sure that you are using a good quality SD card in your camera.

Table of Contents