Components (Fig. 1); Intended Use - DeWalt DWV010 Instruction Manual

connected to an outlet having the same configuration as the plug.
No adaptor should be used with this appliance.
Motor
Be sure your power supply agrees with the nameplate marking.
Voltage decrease of more than 10% will cause loss of power and
overheating. D WALT tools are factory tested; if this tool does not
e
operate, check power supply.
NOTICE: DO NOT operate this tool on D.C. current. Tool damage
may occur.
SAVE THESE INSTRUCTIONS

COMPONENTS (FIG. 1)

WARNING: Never modify the power tool or any part of it.
Damage or personal injury could result.
A. Top handle/cord wrap
B. Power cord
C. Vacuum head
D. Canister latch
E. On/off switch
F. Canister
G. Anti-static suction hose
H. Casters
ANTI-STATIC HOSE
The DWV010 is equipped with an anti-static grounding system
including an anti-static hose which will prevent static shocks caused
by vacuuming dry debris.

INTENDED USE

This vacuum is used for fine particulate pick-up, like wallboard,
concrete, wood or surface dust.
DO NOT use in rain or in presence of flammable liquids or gases.
I. HEPA Filters
J. Threaded hose inlet
K. Hose strap
L. Tool control switch
M. Outlet for power tools
N. Bag
O. Airlock connector
28
These heavy-duty vacuums are for professional use. DO NOT let
children come into contact with the tool. Supervision is required
when inexperienced operators use this tool.
NOTE: This vacuum is intended for commercial use.
This appliance is not intended for use for use by persons (including
children) with reduced physical, sensory or mental capabilities or
lack of experience or knowledge.
Children should be supervised to ensure they do not use the
equipment as a toy.
FIG. 1
B
A
C
E
M
L
J
H
N
G
K
F
D
O