Table of Contents
Advertisement
2.
The
3.
Press the Up/Flash button again for the
flash function has been "forced on" (manual flash).
If the flash is not ready, a red LED will light up and the
flash is ready before taking a photo.
4.
Press the Up/Flash button until the
is the default flash setting.
Note: This function will not work if your battery power is insufficient.
Self-Timer
You can include yourself in a photo by using this feature to delay the time between your pressing the Shutter
button and when the photo is actually taken. It is recommended that you use a tripod when you use the
self-timer function.
1.
Press the Menu button.
2.
Press the Up/Down button repeatedly to select the self-timer
3.
Press the Shutter/OK button again within 5 seconds. The timer runs and the LED flashes for 10 seconds
before the photo is taken.
Note: the camera will return to the camera mode if you don't press the Shutter/OK button within 5 seconds.
icon as well as the red LED will begin to flash indicating that the flash is charging.
icon to appear on the LCD screen. This means the
icon will flash repeatedly- wait until the
icon appears again. This will turn off the flash function. This
13
icon on the LCD.
Advertisement
Table of Contents
