Table of Contents
Advertisement
Slave is synced
20 .
20
JAMSYNC
The following directions describe how to record loops on multiple JamMan Solo XTs
using JamSync. These directions assume you are using the factory default settings in
the JamMan Solo XTs. Devices should be configured as shown in the following table:
PARAMETER
Pedal Tempo
Auto Record
Record Sequence
Loop Level
Rhythm Level
When JamMan Solo XTs are initially connected via the JAMSYNC
jacks,
will appear in the slave's display, indicating JamSync
Syn
connection is established. The
when initially powering up devices which are slaved to a master.
Properly connected slaves will also be indicated by a decimal
segment which will light in the display, as shown to the left. If you
have a slave connected and do not see these indicators, check your
JamSync cable.
MASTER SETTINGS
Off
Off
Record » Play » Dub
12 o'clock
9 o'clock
indicator will also be displayed
SYn
SLAVE SETTINGS
Off
Off
Record » Play » Dub
12 o'clock
Off (fully counter-clockwise)
33
Advertisement
Table of Contents
