JamMan Solo XT Owner's Manual page 28

To record an overdub:
Press the
1. <PEDAL SWITCH>
initiate playback of the loop, indicated
by a solid green
Press the
2. <PEDAL SWITCH>
when you want to start overdubbing.
Overdub recording will be indicated
by a solid yellow
As soon as you're done overdubbing,
3.
press the
<PEDAL SWITCH>
Anything played while overdub was
active is now heard with the recorded
phrase.
Each time an overdub is added, the last overdub is merged with the original loop and it can
NOTE:
no longer be undone using the Undo feature. If the combined loop and overdub length exceed 10
minutes (e.g., a 6 minute loop and 6 minute overdub, etc.), the two will automatically be merged and
the overdub cannot be undone. Overdubs added to a recorded loop of 5 minutes or less will not
be automatically merged.
22
to
LED.
STATUS
again
LED.
STATUS
again.
To add additional overdubs, repeat
4.
steps 2 and 3.
Quickly press the
5.
twice to stop loop playback.
Press the
6. <STORE>
you wish to store the loop.
<PEDAL SWITCH>
button twice if