Panasonic PT-AE7000U PT-AT5000E PT-AE700EA PT-AE7000EH Service Manual page 13

Rotation check of Exhaust fan and Power fan (Displays "NG" when Fan is abnormal condition)
(17)-
* When detected abnormal temperature around the air intake port / air exhaust port / LCD block,
TEMP indicator turned on. If arriving at the critical temperature, the power supply will shut down
automatically (thermal shutdown) and the indicator will flash.
(18)- Lens memory operation abnormality check (Abnormal condition = "NG")
(19)- Judgment for Replacement Time of Lamp (Cumulative Usage more than 4000H is "NG")
* Warning of the lamp cumulative usage time and shutdown use the conversion time for LAMP POWER "NOMAL".
(20)- The number of times that carried out reset of "LAMP RUNTIME"
(21)- Cumulative usage time (conversion for LAMP POWER "NOMAL" time) and Number of LAMP ON times
"Current number : Last reset : Reset of last but one"
4.STATUS
・Display version of each software and each data.
STATUS
MODEL TYPE
SERIAL NUMBER
DYNAMIC GAMMA
UNIFORMITY
-------- SOFT VERSION --------
MAIN
SUB
IRIS
FPGA
FRC ID MAJOR
FRC ID MINOR
FRC CONFIG MAJOR 01000000
FRC CONFIG MINOR 00000000
-------- DATA VERSION --------
BITMAP
ENG FONT
RUS FONT
THA FONT
KOR FONT
CHI FONT
JPN FONT
ET7121 GAMMA
COLOR MANAGEMENT 1.00
x.v.Color
OD
5.FLICKER ADJUST
・To enter the flicker adjustment mode.
Note: If replacing the optical parts (Optical block) or A-P.C.Board, adjust to flicker is minimum according to the
"SECTION 3 Flicker adjustment".
PT-AE7000U
SA*******
OK
OK
1.00
1.00
1.00
1.00
02000000
02000000
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
INF - 7