Esd Protection - Nokia N9 RM-696 Service Manual

Table of Contents

Nokia N9 (RM-696)

L1L2 Service Manual

3. ESD PROTECTION

Nokia requires that service points have sufficient ESD protection (against

static electricity) when servicing the phone.

Any product of which the covers are removed must be handled with ESD

protection. The SIM card can be replaced without ESD protection if the

product is otherwise ready for use.

To replace the covers ESD protection must be applied.

All electronic parts of the product are susceptible to ESD. Resistors, too,

can be damaged by static electricity discharge.

All ESD sensitive parts must be packed in metallized protective bags

during shipping and handling outside any ESD Protected Area (EPA).

Every repair action involving opening the product or handling the product

components must be done under ESD protection.

ESD protected spare part packages MUST NOT be opened/closed out of

an ESD Protected Area.

For more information and local requirements about ESD protection and

ESD Protected Area, contact your local Nokia After Market Services

representative.

V ersion 8.0

Table of Contents