Advertisement
Bel Canto products are automatically covered by a 90 day factory warranty that covers all internal parts and labor.
Register online (http://www.belcantodesign.com/eOne/support/warranty-registration-form/) within 30 days of
purchase from an authorized dealer to automatically extend your warranty for 2 years starting from the date of
purchase. If you do not have web access, please contact your dealer for assistance. Upon fully completing
registration, within 5 business days you will receive an email that officially validates your warranty. Your
information will be used for internal use only and will not be sold or released outside Bel Canto. Your comments
and suggestions are appreciated and help us continually improve our products and services.
The warranty is only valid to the original owner and is non-transferable. Damage caused by unauthorized
modification, abuse, or neglect of product will void your warranty. Any cost associated with return of product is
the sole responsibility of the owner. All returns require a return authorization number issued after completing the
RMA form in the support section of our website. If you have any questions, please feel free to contact us online at
info@belcantodesign.com.
REF600
packaging contains the following:
M
1 (one) – REF600
1 (one) – REF600
1 (one) – Power cord [6.6' – 2 meters long]
Carefully unpack each piece and check for shipping damage. If there is any damage, or if anything is missing,
please contact your dealer, distributor or Bel Canto Design. Save all packing materials as they are specially
designed to protect the unit during transportation or shipping. If the packing becomes lost or damaged, please
contact your dealer, distributor or Bel Canto before attempting to transport your unit
The power supply on the REF600
plug for your local power system. If you believe this to not be true, please contact your dealer immediately.
This product, like any electrical component, can be dangerous and cause injury if not used properly. Before
powering this product, it is necessary to read and follow setup procedures.
The REF600
runs warm and can be placed in many system locations with proper air circulation. We do not
M
recommend placing weights or other objects directly on the REF600
Do not use harsh chemicals when cleaning the outside of your REF600
Single Ended RCA and Balanced XLR connectors are available. XLR jacks allow balanced hookup using the
standard North American pin configuration: Pin1 = Ground, Pin 2 = Signal +, Pin3 = Signal -
Amplifier
M
User's Guide
M
is preset for the proper voltage. The power cable should have the correct
M
IMPORTANT!
Make all connections
before powering your
unit!
.
. This may scratch or mar the chassis finish.
M
.
M
Advertisement
