Summary of Contents for E-one REF600M
-
Page 2: Declaration Of Conformity
M o n o P o w e r Am p l i f i e r w i t h T A B L E C O N T E N T S Information ……………………………………………………………………………………2 Safety Information ……………………………………………………………………………………3 Certifications/Standards ……………………………………………………………………………………4 Warranty ……………………………………………………………………………………4... - Page 3 Explanation of symbols used in this manual or on the TO COMPLETELY DISCONNECT THIS APPARATUS rear/underside of the apparatus: FROM THE AC MAINS, DISCONNECT THE POWER SUPPLY CORD PLUG FROM THE AC RECEPTACLE. The Lightning Flash with arrowhead symbol within an equilateral triangle is intended to THE MAINS PLUG OF THE POWER SUPPLY CORD alert the user to the presence of uninsulated SHALL REMAIN READILY ACCESSIBLE.
- Page 4 Fuse replacement: Always ensure the fuse cover is fitted. If the fuse cover is This appliance is fitted with a non-rewireable 10 amp missing do not use the plug. Contact your Bel Canto mains plug. The plug contains a 10 amp fuse. If the fuse retailer to obtain a replacement fuse cover.
- Page 5 Bel Canto products are automatically covered by a 90 day factory warranty that covers all internal parts and labor. Register online (http://www.belcantodesign.com/eOne/support/warranty-registration-form/) within 30 days of purchase from an authorized dealer to automatically extend your warranty for 2 years starting from the date of purchase.
- Page 6 onnections Never Connect the Positive Speaker Output to Any Ground Contact! Use Class 2 Wiring for all Loudspeaker Connections! Connecting the Positive Speaker Output on the REF600 to Ground will cause the amplifier to go into protection and could damage the amplifier and void the warranty. The Negative output is connected to Ground internally. ...
- Page 7 The REF600 and DC Coupling The REF600 is DC coupled with no coupling capacitors in the signal path. This optimizes audio signal quality, maximizing micro and macro-dynamic performance. While the amplifier will protect itself and your loudspeakers from excessive DC offset, it is critical to ensure that any Preamplifier or DAC has low DC offset at its output as this will be amplified by the REF600 .
-
Page 8: Specifications
Specifications Power Output 1% THD: 600W 4 ohms, 300W 8 ohms Minimum Load: 2 ohms Peak Output Current: 27 amperes Frequency Response: +/-3 dB 0Hz-50KHz, all loads THD+N: 0.003% 1W, 1KHz, 4 ohms IMD (CCIF): 0.0003%, 1W, 14:15KHz, 4 ohms Output noise: 35uVRMS A-weighted 10Hz-20KHz Voltage gain:... - Page 9 Application of Council Directive(s): 2004/108/EC and 2006/95/EC, as amended Standard(s) to Which Conformity Is Declared: EN 55013:2001 + A1:2003 + A2:2006 EN 55020:2007 EN 61000-3-2:2006 EN 61000-3-3:1995 + A1:2001 + A2:2005 EN 60065:2002/A12:2011 Manufacturer: Bel Canto Design, Ltd. 221 1 Street North Minneapolis, MN 55401 USA The equipment identified here conforms to the Directive(s) and...
- Page 10 bel canto version 1.0...