Feed Sensor And Empty Sensor - Samsung ML-4500/XEV Service Manual

Disassembly and Reassembly

3-30 Feed Sensor and Empty Sensor

1. Before you remove these parts, you should
remove:
– Rear cover (see page 3-4)
– Shield engine ass'y (see page 3-19)
2. Unplug the one connector from the main board
and remove the two screws securing the holder
feed ass'y, then remove the holder feeder ass'y.
3-20
3. Remove the feed sensor and the empty sensor.
Feed sensor
Empty sensor
Samsung Electronics