Midi Clock - Decibel Eleven Time After Time Operation Manual

MIDI Continuous Control
Any of the Time After Time's knob settings can be controlled in real time using MIDI
Continuous Controllers. The following chart shows the CC#s for the various controls:
Function
DELAY TIME
FEEDBACK
MOD DEPTH
MOD SPEED
MIX LEVEL
TAP MODE TOGGLE
BYPASS
TAP
So as not to cause a jump in parameter value when receiving MIDI CC data, the Time
After Time will not begin to respond to MIDI CC data until the received CC value is the
same as the current value of the corresponding control.

MIDI Clock

If the Time After Time is in TAP MODE, it will sync to incoming MIDI Clock messages. It
will only sync to MIDI Clock tempo messages. The Time After Time will not respond to
MIDI Start, Continue, Stop or MIDI Time Code commands.
MIDI Clock and tap tempo both control the same global tempo of the Time After Time.
Therefore, if you tap in a tempo and then a MIDI Clock is recognized on the MIDI input
channel, the MIDI Clock will override the tap tempo. Likewise, if MIDI Clock is stopped,
tap tempo will control the global tempo.
CC# Value
34 0-127
35 0-127
36 0-127
37 0-63=SLOW, 64-127=FAST
38 0-127
39 any
40 any
41 any
12