Table of Contents
Advertisement
Wires are fed through the holes located on top
of the metal housing.
DIP SWITCHES
With the DIP switches, you can control "Auto-mute On/Off," and configure the touch screen to have 4,
6, or 24 tracks.
Note: The default setting is SW1 & SW2 off; SW3 & SW4 On .
Auto-mute will disable sound after 5 minutes of inactivity.
Note:
CONTROL SWTICHES
The control buttons control volume, brightness, contrast, color, tint, misc (speaker on/off, revolve
direction and reset picture).
FUNCTION
SETTING
UP
DOWN
RIGHT
Fixing the wires by fasten the screws on the wiring socket.
RIGHT – Press once to see the available setting options then
keep on press for item selection.
UP & DOWN – Press to increase or decrease the property
parameter or go to the desire setting options.
6
BUTTONSW1 - SW8 WIRING
C0 S1 S2 S3 S 4 C 1
C 0 S1
S2
S3
S4 C1
C0 + S1 = SW 1
C1 + S1 = SW 5
C0 + S2 = SW 2
C1 + S2 = SW 6
C0 + S3 = SW 3
C1 + S3 = SW 7
C0 + S4 = SW 4
C1 + S4 = SW 8
Dip SW1: Auto-Mute On/O ff
D I P SW 1 2 3
Dip SW2: Not available
O N
O F F
Dip SW3: On On O ff Off
Dip SW4: On O ff Off Off
FUNCTION_
SETTING
U P
RIGHT
DOWN
4
Advertisement
Table of Contents
