3.2 Using the controls
After turn on DV-6664, you can start controlling its various options by following the steps below.
Step 1.
You will need a small screwdriver or any similar type of tool to
reach the controls of DV-6664.
Note: A tool is not included in the DV-6664 package. A small
screwdriver like the one shown in the picture will do.
Step 2.
FUNCTION
SETTING
Determine which control you like to configure, see Control
UP
DOWN
RIGHT
Switches in page 6.
CAUTION: The button only requires a light touch. Do not press too
hard on the button. MedeaWiz is not responsible for any damages
caused by the abuse.
Step 3.
After pressing the "RIGHT" button, a menu will appear on the
LCD display against whatever video image is playing at the
time.
Go to the option that you would like to change by pressing
the "RIGHT" button again and cycle through the options.
Note: If you would like to go to the "MISC" menu, press the
"RIGHT" button until "MISC" is selected on the screen, and press
either "UP" or "DOWN" button to enter the "MISC" menu. The
"MISC" menu will have the options as shown below.
Step 4.
When an option is selected, use the "UP" and "DOWN" buttons to change the properties of each
option.
7