Access By Ip Address And Http Port - FDT FD7901 User Manual

these 2 buttons.
Here is a "Network Configuration" button in the right-clicking button list. From this button,
you can modify the IP, Device display name and http port of the FDT camera. Please note:
1. The camera will reboot automatically if you modify its http port.
2. Please enter the right username and password of your camera before you modify any
network configuration of the camera.

4.2.3 Access by IP address and http port

After launching the SearchTool, click the next to skip the welcome page and refresh the
searching page to bring up the cameras on your LAN. Then you can double click the
camera you selected to login by your default web browser, or you can open the web
browser you want first and input the camera's IP address and http port in the URL address
bar of the browser by manual to login your camera. You can access the FDT camera by
FDT Technologies-http://www.fdt.us