Desktop Access Setup - FDT FD7902 Quick Start Manual

Motion Detection Setup
QUICK START GUIDE
6
On this screen, note the different alerts that motion
detection can trigger such as push notifications, SD
card recording, email alert snapshots, FTP snapshots,
or FTP recordings. You can also customize how many
snapshots to send per alarm. You can configure email
alerts by going to Settings -> Email Setting and
filling out the fields on that screen. You can configure
FTP alerts by going to Settings -> FTP Setting and
filling out the fields on that screen.

Desktop Access Setup

QUICK START GUIDE
Connect the Camera
1
Connect the camera to a power over ethernet
(PoE) jack on your router or connect it to your
WiFi via the FDT View App. Wait 30 seconds for
the camera to start-up.
Install the Search Tool
2
Using a PC or Mac, insert the included CD and
install the Search Tool. Alernatively, download the
Search Tool software from fdt.us/support.
3
Launch the FDT Web Interface
Open the Search Tool interface and click "Next" to
continue. Select your camera's IP address and
double click it. This will launch the FDT Web
Interface to your default browser.
4
Logging into the FDT Web Interface
Log into the the FDT Web Interface using the
default login credentials (default username and
password). If this is your first time logging in, you
will be prompted to chnage your pthe default
password. Please select a password that is at
least 8 characters long as well as a combination
of uppercase and lowercase letters, and numbers.
Click the "change pwd" when done. You will be
prompted to login with your new password.
27 28