Table of Contents
Advertisement
Video Operations:
While flying the drone, press the video button on the transmitter once to start
recording video. The indicator light will turn on to indicate video is being
recorded. Press the video button again to stop recording, the indicator light will
turn off and the video is saved to the installed memory card.
After flight, use the included card reader to view images and footage on any computer.
Accelerator Calibration
When the drone flies unstable or drifts quickly in one direction you need to calibrate
the accelerometer.
1. On a flat surface, pair the transmitter to the drone so it is ready to fly.
2. Set the drones speed to maximum, 3 beeps. Keep the throttle at its lowest
position.
3. Push the left control stick to the bottom-left corner and the right control stick
to the bottom-right corner. The drones
lights will flash for 1-2 seconds to
indicate calibration is complete.
Troubleshooting
Rotors don't work
or drone is drifting
on take off
Can't take off
Website: www.worldtechtoys.com
Email:
customerserv@worldtechtoys.com
Phone:
(877) 498-8697
Monday - Friday / 9:00AM - 5:00PM / Pacific Time
WWW.WORLDTECHTOYS.COM
Troubleshooting of Drone
Maintenance Method
Turn off drone and transmitter, turn on and pair again.
If problem persists, check rotor blades and replace if
damaged.
Turn off drone and transmitter, turn on and pair again.
Recharge drone battery. Replace transmitter batteries.
If still not working, perform Accelerator Calibration.
SPECIFICATIONS,
COLORS AND CONTENT
MAY VARY FROM ILLUSTRATIONS
MADE IN CHINA
Hide quick links:
Advertisement
Table of Contents
