Safety & Precautions 1. Important Instructions This product is not a toy but a precision piece of equipment with integrated technologies of mechanics, electronic, air dynamics and radio frequencies. In order to avoid accidents, the operator must read these instructions carefully. Use safety precautions when operating, if operated incorrectly, serious physical injury and/or property loss may occur.
Parts Overview Drone USB Charger Camera Rotors Spare Rotors Card Slot Power Switch/ Charge Port SD Card & Reader Picture / Video Indicator Transmitter Power Indicator Trim Mode Forward Throttle /Backward /Turn Left /Strafe Left /Turn Right /Strafe Right /Speed /Flip Stunt Control Mode...
Flying Environment Please fly in an open, spacious area with no obstacles, people or animals nearby. - Please make sure your environment is suitable to fly in. - When flying, do not fly out of your field of vision. - Children should only fly under adult supervision. -Range of control: Do not fly the drone beyond the range of 80ft.
Page 5
Drone Charging Connect the drone to the USB charging cable as shown, insert USB into computer or any USB charging port. The USB charger will light up to indicate charging. When the light turns off charging is complete, disconnect drone promptly. Take Off Guide Follow the steps below to pair your transmitter to drone and start flying: 1.
Operation and Controls Attention: Please understand the controls and movements of the drone during operation to prevent injury. During operation drone will lose some power as battery depletes, you will need to increase throttle to maintain flight. THROTTLE - Control the drone to make it ascend or descend. DIRECTION - Control the rotation of the drone left or right with the throttle stick.
Speed Control This drone has three speed modes with increasing speed and sensitivity to the controls for more advanced users and different flight areas. Gently press in on the throttle stick (Figure 1) to cycle through the three modes: One Beep : 30% Sensitivity for beginners and indoor environments. Two Beeps: 50% Sensitivity for intermediate users indoors or outdoor environments.
Trimming Adjustment Step 1 - Press Trim Mode to start process; Step 2 - Use the Left and Right control sticks to adjust drone trim; 1. Turn Left Trim 4. Forward Trim 2. Turn Right Trim 5. Strafe Right Trim 3.
Video Operations: While flying the drone, press the video button on the transmitter once to start recording video. The indicator light will turn on to indicate video is being recorded. Press the video button again to stop recording, the indicator light will turn off and the video is saved to the installed memory card.