Signage Display; Setting; Wi-Fi; Ethernet - Philips 55BDL4050D User Manual

55BDL4050D
5.

signage display

5.1.

Setting

Setting main items:

(1) Wi-Fi

(2) Ethernet

(3) Signage Display
(4) System Tools
(5) Storage
(6) Apps
(7) Date & time
(8) Developer options
(9) About
5.2. Wi-Fi
Via Enable/Disable to control Wi-Fi On/OFF. After Enable, the screen
will list all available WiFi AP.
Note :
Ethernet will be disable automatically if Wifi turn on and connect to
network .
5.3. Ethernet
Via Enable/Disable to control Ethernet On/Off.After enable Ethernet, it
will display:
(1) Connect Type (available type is DHCP/Static IP)
A. DHCP
B. Static IP
C. IP Address
D. Netmask
E. DNS Address
F. Gateway Address
(2) Mac Address
Note:
WiFi will be disable automatically if Ethernet turn on and connect to
network.

5.3.1. DHCP

DHCP mode:
(1) Cannot modify IP Address, Netmask, DNS Address and Gateway..
(2) (If connect successfully, it will display current network
configuration.

5.3.2. Static IP

Under StaticIP, User can manually input IP Address, Netmask, DNS
Address and Gateway.
Note:
IP address, netmask, DNS address and gateway address input limitation
(1)Format:
I. number 0-9
II. decimal point ". "
28