Equalizer; Stereo; Speakers; Sound Ident. (Sound Identification) - Sharp LC-26GA5E Operation Manual

Menu operations
E

EQUALIZER

Menu Operation: SOUND Group C (page 11)
This enables the selection of the pre-defined
equalization modes. Each time you press the Red
button, you can switch EQUALIZER MODE
("PERSONAL"/"CLASSIC"/"JAZZ"/"POP"/"CONCERT"/
"STADIUM").
Item
PERSONAL: User configurable mode. Five
equalizer bands are available.
CLASSIC: Predefined mode, designed to listen
classic music
JAZZ: Predefined mode, designed to listen jazz
music
POP: Predefined mode, designed to listen pop
music
CONCERT: Predefined mode, designed to listen
concert music
STADIUM: Predefined mode, designed to watch
sports
E

STEREO

This enables the selection of the reception mode when
receiving a "STEREO" or "DUAL" (bilingual) signal. To
let you enjoy "STEREO" and "DUAL" broadcastings,
this TV receives stereo, bilingual, and monaural
broadcasts.
NOTE
• About sound mode: In the "STEREO" menu you can
select a sound mode to the SPEAKERS and
HEADPHONES, and another to the audio output of the
external connectors (EXT 2 and AV OUTPUT).
Depending on the sound transmission the sound
reproduction can be chosen in the "STEREO" menu as
indicated below.
• When the TV is receiving a "STEREO" programme, the TV
selects "STEREO" automatically, and you can change:
• When the TV is receiving a BILINGUAL programme, the
TV selects DUAL CHANNEL A automatically, and you can
change:
DUAL CHANNEL A t DUAL CHANNEL B t DUAL
CHANNEL A B t MONO
• When the TV is receiving a MONO NICAM programme,
the TV selects MONO NICAM automatically, and you can
change:
MONO NICAM t MONO (FM)
• When the TV is receiving a MONO (FM) programme, the
TV selects MONO automatically but the sound mode
cannot be changed.
Exception: When you are watching the TV through the
external sources (EXT1, EXT2, EXT3, EXT3 S-VIDEO), the
"STEREO" menu and (2) (Sound Mode Selector) are
not operative.
Downloaded From TV-Manual.com Manuals
STEREO t MONO

✔ SPEAKERS

Menu Operation: SOUND Group D (page 11)
Change sound mode.
Select your desired mode to your preference
depending on the type of broadcast.
✔ AV
Menu Operation: SOUND Group D (page 11)
Change sound mode in the audio output of the external
connectors. Select your desired mode to your
preference depending on the type of broadcast.
✔ SOUND IDENT. (SOUND
IDENTIFICATION)
Menu Operation: SOUND Group D (page 11)
To activate (ON) or deactivate (OFF) the automatic
identification of audio system of the current
programme.
Item
ON: The TV automatically identifies the received
audio system MONO FM, STEREO or DUAL
SIGNAL.
OFF: Disqualifies the automatic identification of the
audio system and forces the sound into MONO
FM.
This mode can be convenient when the level of
the signal received is extremely weak.
NOTE
• This function is independent for every programme.
13