Sound Menu; Using Sound Menu Screen - Sharp LC-26GA5E Operation Manual

Useful adjus
FM Radio menu screen
You can make adjustments for FM radio broadcasting
by using RADIO on the remote control.
1
Press RADIO to display the RADIO MENU screen.
nu operations 2
Press a/b to select the preset radio channel.
3
Press c/d to adjust the volume.

SOUND menu

4
WIDE MO
Press END to exit the MENU screen.
And you can also add a new radio channel or change

Using SOUND menu screen

the preset channel settings by pressing
mmon Operation
You can display the TUNE mode by pressing
You can select the display size by pressing
remote control.
NOTE
• "WIDE MODES" cannot be set when the FM radio mode
is selected.
Press MENU to display the menu screen.
Manual selection
• The "SOUND SPEAKER LEVELS" menu screen can
be displayed directly by pressing the Green button.
1
Press c/d to select "SOUND".
Press
screen.
WIDE MODES
SOUND
EFFECTS
WIDE MODES
LEVELS
EQUALIZER
STEREO
SIZE
POSITION
lecting an item from SOUND Group A
1 Perform steps 1 and 2 in Common Operation.
2 Press a/b to select "EFFECTS", and then press
OK.
SELECT
3 Press c/d to select/adjust.
2
Press a/b to select "WIDE MODES". And then
select your desired screen size format among
SOUND EFFECTS
"NORMAL 4:3", "CINEMA", "ZOOM 14:9",
SOUND EFFECTS
"PANORAMA", "FULL" or "AUTO" by pressing
BYPASS
c/d.
Item
NORMAL 4:3: For 4:3 "standard" pictures. A side
ADJUST
bar appears on each side.
CINEMA: For 16:9 broadcast cinema movies, etc.
lecting an item from SOUND Group B
Bars may appear on the top and bottom with some
1 Perform steps 1 and 2 in Common Operation.
programmes.
ZOOM 14:9: A thin side bar appears on each side,
2 Press a/b to select "LEVELS", and then press d.
and you may also see bars on the top and bottom
3 Press a/b to select "SPEAKERS" or "EXTERNAL",
with some programmes.
and then press OK .
PANORAMA: In this mode the picture is
4 Press a/b to select the desired menu item
progressively stretched toward each side of the
(Example: "VOLUME", "BALANCE" etc).
screen.
5 Press c/d to select/adjust.
FULL: For 16:9 squeeze pictures.
AUTO: In this mode the screen size changes
SOUND SPEAKER LEVELS
automatically.
VOLUME
60
BALANCE
0
LOUDNESS
OFF
Downloaded From TV-Manual.com Manuals AUTO VOL
ON
0
to display the "WIDE MODES" menu
NORMAL 4:3
CINEMA
CINEMA
ZOOM 14:9
PANORAMA
FULL
0 AUTO
0
ADJUST NORMAL
BYPASS
DOLBY VIRTUAL
PANORAMA
EXIT
VOLUME
100
60
When you select "CINEMA", "ZOOM 14:9" or
"PANORAMA", you can change the vertical "SIZE" and
vertical "POSITION".
1
Perform 1 and 2 described on the left to select
"CINEMA", "ZOOM 14:9" or "PANORAMA".
2
Press a/b to select "SIZE" or "POSITION". The
"SIZE" or "POSITION" indicator will be displayed.
3
Press c/d to adjust the item to your desired size
and position.
4
Selecting an item from SOUND Group C
Press OK if you wish to normalize the vertical
OK.
"SIZE" or vertical "POSITION".
1 Perform steps 1 and 2 in Common Operation.
5
Press END to exit.
2 Press a/b to select "EQUALIZER", and then press
Red.
OK.
3 EQUALIZER MODE: Press the Red button to select
Auto selection
a pre-defined equalization mode:"PERSONAL",
"CLASSIC", "JAZZ", "POP", "CONCERT" or
Some broadcasting station send the WSS signal with
"STADIUM".
on the
information of original screen size. When the TV is in
4 To change the EQUALIZER MODE "PERSONAL":
"AUTO" mode and receives the WSS signal, it changes
Press c/d to select 100Hz, 330Hz, 1KHz, 3.3KHz the screen size automatically.
or 10KHz.
1
Press
Press a/b to adjust the item to your desired
"WIDE MODES" screen.
position.
2
Press a/b to select "WIDE MODES". And then
SOUND EQUALIZER
select "AUTO" by pressing c/d.
When the TV is
receiving
WSS code 16:9
100Hz
330Hz
WSS code 14:9
WSS code
MODE SELECT
NOTE
• When you are watching the TV through the external
sources (EXT1 or EXT2), and it receives information
Selecting an item from SOUND Group D
of 16:9 format (through the audio-video control pin)
the TV selects "FULL" automatically.
1 Perform steps 1 and 2 in Common Operation.
• In order for the "AUTO" to function correctly, the
EXIT
2 Press a/b to select "STEREO", and then press
"WSS" item must be set "ON" in the "GENERAL
OK.
SETUP" menu. To check it, see page 21.
• The "STEREO" menu screen can be displayed
directly by pressing (2) (Sound Mode
Selector).
3 Press a/b to select the desired menu item
(Example: "SPEAKERS", "AV" or "SOUND IDENT.").
4 Press c/d to select/adjust.
SOUND STEREO
SPEAKERS
MONO
AV
MONO
SOUND IDENT.
ON
SELECT ADJUST
on the remote control to display the
The TV selects
automatically
CINEMA
1KHz 3.3KHz 10KHz
ZOOM 14:9
PERSONAL
PANORAMA
ADJUST EXIT
MONO
STEREO
DUAL A
DUAL B
EXIT