1. Manuals
  2. Brands
  3. Vari Manuals
  4. Lawn and Garden Equipment
  5. Hurricane F-530
  6. Instructions for use manual

Vari Hurricane F-530 Instructions For Use Manual

Mulcher
Hide thumbs
Table of Contents

Advertisement

Quick Links

Mulcher
Hurricane F-530
Instructions for use
2007

Advertisement

Table of Contents
loading

Related Manuals for Vari Hurricane F-530

Summary of Contents for Vari Hurricane F-530

  • Page 1 Mulcher Hurricane F-530 Instructions for use 2007...

  • Page 2: Table Of Contents

    6.10 Disposal of packaging and machine after the end of service life......23 Instructions for ordering spare parts.................23 Contact to manufacturer....................23 The list of parts.........................23 10 Letter of Guarantee......................36 Text and illustrations c 2006 VARI,a.s. Publication No. VL-116-2006...

  • Page 3: Basic Information

    Hurricane F-530 with leading wheel 1 Basic information.  Ask your dealer to provide the machine unpackaging and the briefing. Fill in the following data concerning your machine. The data are important for ordering spare parts. It is advised to have a copy of this page with all data on the machine purchase for the case of loss or theft of the original record.

  • Page 4: Foreword

    ,a.s. as a system of gardening, farming, small agricultural and communal machinery. The mulcher Hurricane F-530 (from the year of manufacture of 2006) is a follow-up to the previous generation of the machine, very popular on the market thanks to its very easy operation, silent, high performing and fuel-saving engine HONDA.

  • Page 5: Operation Safety

    Hurricane F-530 with leading wheel 3 Operation safety. 3.1 Safety regulations. This international symbol indicates important messages concerning safety. When you see the symbol, be aware of a possible injury threatening to you or to other persons and read the attached instructions carefully.

  • Page 6: Declared And Guaranteed Noise And Vibration Values

    Hurricane F-530 with leading wheel When the machine is in operation, all other persons (children in particular) and animals have to be outside the machine’s working space. The machine operator can continue working only after they have been shown out to a safe distance (see Pictograph 6).

  • Page 7: Use, Technical Specifications And Technical Description Of The Machine

    Hurricane F-530 with leading wheel Note: The pictures of the self-adhesive labels with the pictographs in the right part of the table correspond with their position as seen from the operator’s site. 4203 4 Use, technical specifications and technical description of the machine.

  • Page 8: Technical Specifications

    Hurricane F-530 with leading wheel are dry and the cutting blades are capable of crushing them into small pieces which need not be removed from the surface. The maximum recommended height of swards emerged in the same period when cut is up to 40 cm. This maximum height may decrease according to sward density, moisture content and type.

  • Page 9: Instructions For Use

    Hurricane F-530 with leading wheel Rear spots for Figure 1: Mulcher Hurricane F-530 holding the machine (for Lever of blade drive driving, lifting or clutch with brake loading) Accelerator lever Lever of wheel (adjustment of engine drive clutch revolutions) Handlebars...

  • Page 10: Putting Into Operation

    Hurricane F-530 with leading wheel Figure 2: Machine assembly 5.2 Putting into operation. The machine may be delivered without engine fillings (in dependence on different national regulations)! First thoroughly read the instruction for engine use! You can prevent a possible damage to the engine.

  • Page 11: Machine Travel

    Hurricane F-530 with leading wheel Starting of the cutting blade is accompanied with a partial V-belt slippage and with the accompanying phenomena such as whistling, rattling, etc. The phenomenon usually disappears after the belt has started properly moving. 4. After the cutting blade starts turning, press the lever completely to the handrail and hold it firm.

  • Page 12: Machine Stop

    Hurricane F-530 with leading wheel Position CHOKE (for cold start of the engine only) – engine runs on choke Position MAX (hare) – engine runs at maximum speed Position MIN (turtle) – engine runs idle Position STOP - engine stands still 5.5 Machine stop.

  • Page 13: Adjustment Of Cutting Height Of The Machine With Leading Wheel

    Hurricane F-530 with leading wheel might damage the machine. If these cannot be removed, avoid working in such places. Working width has to be at all times accommodated to stand density! If possible, do not use the machine on wet grass. Remember that the terrain you are moving on must always be safe.

  • Page 14: Sward Cutting

    Hurricane F-530 with leading wheel shoe position for lower height of the stubble, approx. 5 cm. Always work with an assistant when changing the slide shoe position. 1. secure the machine against self-motion (by wedging) on a solid surface or a pad 2.

  • Page 15: Maintenance, Care And Storage

    Hurricane F-530 with leading wheel Be very careful while lifting the machine and driving back! b) Engine losing rotations and stalling: release both levers on the handlebars, lift the machine front by pushing down on handrails and move the machine slightly back.

  • Page 16: Engine Oil Replacement

    Hurricane F-530 with leading wheel excessive wear. The exchange interval can be extended up to 130 hours with oils of higher grades (API GL – 5, SAE 80W – 90). The running-up period of 5 hours must be observed. Czech oils fully meeting the requirements are „MOGUL TRANS 90“ or „MOGUL TRANS 80W-90“.

  • Page 17: Tightening Of Bolted Connections

    Hurricane F-530 with leading wheel Figure 6: Lubrication points Figure 6.1: Swivel lever of Figure 6.2: Tightening pulley arm pin and Figure 6.3.: Leading wheel the clutch blade brake pin 6.2 Tightening of bolted connections. Regularly check the tightening of the bolted connections. Always check the tightening of bolts fastening the blade to the blade holder and blade holder to the shaft prior to any machine use.

  • Page 18: V-Belt Replacement And Adjustment Of Tightening Pulley

    Hurricane F-530 with leading wheel Central M10x1x25 bolt has a fine thread and therefore it must not be confused with outer bolts whose threads are normal! d) Tighten the bolts at a prescribed tightening moment (see Chapter 7.2). Should there be excessive vibrations on the machine handlebars after the...
  • Page 19 Hurricane F-530 with leading wheel d) Take the old V-belt off and replace it with a new one. Original V-belt marking is OPTIBELT X13x1335 Ld 6T6K, ord. No. 184 608. It is also possible to use an equivalent V-belt made by other manufacturers at a size of A13x1300 Li (Li=internal length) or A53“...

  • Page 20: Adjusting The Wires Of Pulley, Brake And Wheel Drive Clutch

    Hurricane F-530 with leading wheel Figure 9: Adjustment of the tightening pulley and maximum extension of the V-belt Driven belt Driving belt Guide pulley (blade) pulley (engine) lamination Min 7 mm V-belt Opening for possible connection of the wire hook...

  • Page 21: Diagnostics Of Driving Problems

    Hurricane F-530 with leading wheel 6.6 Diagnostics of driving problems. Problem Cause Remedial action Blade does not turn Tension pulley not sufficiently Set-up the tension pulley by means of stressing the belt adjustment bolt no. 2 (see Fig. 10) Cable fallen out from the tension...

  • Page 22: Washing And Cleaning Of The Machine

    Hurricane F-530 with leading wheel 6.8 Washing and cleaning of the machine. Cleaning and washing the machine, proceed to observe valid regulations and legislation on the protection of watercourses and other water resources against pollution or contamination with chemical substances.

  • Page 23: Machine Storage

    5. In the case of any confusion concerning the correct identification of the component or technical issues, contact your dealer. In the case of any confusions concerning the spare parts or technical issues, the VARI a.s. commercial, customer-service or technical departments are prepared to answer your inquiries.
  • Page 24 Hurricane F-530 with leading wheel...
  • Page 25 Hurricane F-530 with leading wheel Blade drive Pos. Part name Dimensions Drawing - Standard Ord. No. Pcs 100 Chassis of mulcher F-530 weldment 22 9 1536 060 184 111 102 Brake shoe 22 9 1664 024 189 014 103 Driven pulley...
  • Page 26 Hurricane F-530 with leading wheel...
  • Page 27 Hurricane F-530 with leading wheel Wheel drive Pos. Part name Dimensions Drawing - Standard Ord. No. Pcs 200 Engine plate 22 9 8032 050 196 008 201 Riveted mudflap 22 9 8534 010 196 059 202 Handlebars assembly separate part list...
  • Page 28 Hurricane F-530 with leading wheel Pos. 323, 324 and 325 to be mounted after the V-belt (pos. 309) is put on...
  • Page 29 Hurricane F-530 with leading wheel Engine and covers Pos. Part name Dimensions Drawing - Standard Ord. No. Pcs 300 Driving pulley diam. 106 dw assembly 22 9 3325 034 184 022 301 Mulcher V-belt cover assembly 22 9 8545 039...
  • Page 30 Hurricane F-530 with leading wheel...
  • Page 31 Hurricane F-530 with leading wheel Handlebars Pos. Part name Dimensions Drawing - Standard Ord. No. Pcs 1 Welded handlebars 22 9 8078 059 196 002 2 Control lever 32 0 8058 009 196 013 4 Bowden cable of clutch 622 9 8074 044...
  • Page 32 Hurricane F-530 with leading wheel...
  • Page 33 Hurricane F-530 with leading wheel Gearbox Pos. Part name Dimensions Drawing - Standard Ord. No. Pcs Fork weldment 22 1 3330 013A 189 078 Lever assembly 22 9 3330 017 196 022 Driving disc assembly 22 9 3616 006 189 029...
  • Page 34 Hurricane F-530 with leading wheel Pulley assembly Pos. Part name Dimensions Drawing - Standard Ord. No. Pcs Pulley arm 32 0 3330 034 196 010 Pulley bearing shell 32 0 9320 071 196 528 Pulley 632 0 3325 040 189 586...
  • Page 35 Hurricane F-530 with leading wheel Leading wheel Pos. Part name Dimensions Drawing - Standard Ord. No. Pcs Leading wheel frame F-530 (2006) 22 9 1646 042 184 116 Wheel hinge F-530 (2006) 22 9 1646 040 184 117 Distance ring...

  • Page 36: Letter Of Guarantee

    Warranty period for the product and accessories supplied with the product is 24 months from the date of sale to the purchaser if not stated otherwise in the “Service Manual for VARI Machines and Systems Equipped with HONDA Engines“. Time from the enforcement of liability for defects to the date when the user was obliged to take over the thing after the end of repair is not included in the warranty period.
  • Page 37 Hurricane F-530 with leading wheel Warranty inspection 1 Warranty inspection 1 Date: ………………………………………Person in charge:………………………………………………… Machine model………………………… Serial No.:…………………………… Service shop stamp and signature Warranty inspection 2 Warranty inspection 2 Date:………………………………………Person in charge:………………………………………………… Machine model………………………… Serial No.:…………………………… Service shop stamp and signature...

Table of Contents