Fm/Am Radio - Panasonic SC-AK750 Operating Instructions Manual

FM/AM radio

TUNER /
Manual tuning Manual tuning
BAND
Press [TUNER / BAND] to select "FM" or "AM".
1
2 Press [PLAY MODE] to select "MANUAL".
Press [4, / REW] or [¢,
3
frequency of the required station.
" " is displayed when a stereo FM broadcast is being
received.
To tune automatically
Press and hold [4, / REW ] or [¢,
frequency starts changing rapidly. The unit begins auto
tuning, stopping when it fi nds a station.
• Auto tuning may be interrupted when there is excessive
interference.
• To cancel auto tuning, press [4,
[¢, / FF ] once again.
To improve FM sound quality
Press and hold [PLAY MODE] to display "MONO".
To cancel
Press and hold [PLAY MODE] again until "MONO"
disappears.
• MONO is also cancelled if the frequency is changed.
• Turn off "MONO" for normal listening.
RDS broadcasting (For Europe)
This unit can display the text data transmitted by the radio
data system (RDS) available in some areas.
If the station you are listening to is transmitting RDS
signals, "RDS" will light up on the display.
Press [DISPLAY] to display:
Station name ➞ Program Type ➞ Frequency display
(PS)
Program type displays
NEWS VARIED
AFFAIRS POP M
INFO ROCK M
SPORT M-O-R- M
EDUCATE LIGHT M
DRAMA CLASSICS
CULTURE OTHER M
SCIENCE WEATHER
M-O-R- M = "Middle-of-the-Road music"
Note:
RDS displays may not be available if reception is poor.
RQTV0205-B.indd 13 RQTV0205-B.indd 13
/ FF ] to select the
/ FF ] until the
/ REW ] or
(PTY)
FINANCE COUNTRY
CHILDREN NATIONAL
SOCIAL A OLDIES
RELIGION FOLK M
PHONE IN DOCUMENT
TRAVEL TEST
LEISURE ALARM
JAZZ
TUNER /
Memory preset Memory preset
BAND
20 FM and 15 AM stations can be preset.
Preparation
Press [TUNER / BAND] to select "FM" or "AM".
Automatic presetting
1 Tune to the frequency where presetting is to begin.
Press and hold [PROGRAM] to start presetting.
2
The tuner presets all the stations it can receive into the
channels in ascending order. When fi nished, the last station
memorized is tuned in.
Manual presetting
Press [PLAY MODE] to select "MANUAL".
1
2 Press [4, / REW] or [¢,
required station.
Press [PROGRAM].
3
4 Press the numeric buttons to select a channel.
For channels 10 to 20 press [h10], then the two digits.
The station occupying a channel is erased if another
station is preset to that channel.
Selecting a preset station
Press the numeric buttons to select the channel.
OR
1 Press [PLAY MODE] to select "PRESET".
2 Press [4, / REW] or [¢,
channel.
/ FF ] to tune to the
/ FF ] to select the
13
RQT8043
2/22/07 7:02:41 PM 2/22/07 7:02:41 PM