Table of Contents
Advertisement
USING YOUR WASHING MACHINE
PROGRAM SELECTION
The display shows the program name, the water
temperature and the spin speed.
The washing machine has a number of preselected
programs when delivered from the factory. The
preselected programs can be replaced. Contact the
service division for information on which programs are
available and how to alter the preselected programs.
Normal wash, 40 °C
Program for normal to heavily soiled laundry, whites and
colours. Follow the washing instructions for each garment.
This program has fi ve rinses.
White, 90 °C
Program for normal to heavily soiled laundry. Follow the
washing instructions for each garment. 90 °C is a good
temperature for white and light-coloured cotton, such as
bed linen.
White/Colour, 60 °C
Program for normal soiled laundry, whites and colours.
Follow the washing instructions for each garment. 60 °C
is a good temperature for garments worn next to the skin.
White/Colour, 40 °C
Program for normal soiled laundry, whites and colours.
Follow the washing instructions for each garment.
Super quick wash, 60 °C
Fast program for laundry that just needs freshening
up. Follow the washing instructions for each garment.
Garments worn next to the skin ought to be washed at
60 °C.
Super quick wash, 40 °C
Fast program for laundry that just needs freshening up.
Follow the washing instructions for each garment.
Synthetics, 40 °C
Program for synthetics, delicate blended materials and
permanent press cotton. Suitable for shirts and blouses.
Follow the washing instructions for each garment. Many
synthetics will come clean at 40 °C.
Wool/hand wash
A gentle laundry program for wool, silk and garments that
should be washed by hand. This program has a short
spin.
Rinse
This program performs one cold rinse cycle + spin.
Suitable for laundry that just needs to be dampened.
CLOSE THE DOOR AND PRESS THE
START BUTTON
NOTE!
A few seconds after you start a program the washing
machine will begin to fi ll with water from both the hot
and the cold supplies. If for some reason no hot water
is available, the machine waits for one minute and then
fi lls with cold water only. The wash drum does not start
to rotate until it begins to fi ll with water.
The hot water inlet is only open for washing programs
with water temperature of 40 °C or higher.
DURING THE PROGRAMME
Time remaining
'Program started' is shown on the display.
Stopping or changing a program
You can stop a programme by pressing the Stop button
for three seconds. "Stop" appears in the display. To restart
the machine, select a new programme, add any extra
detergent needed and press the Start button.
NOTE!
Do not open the detergent compartment while the
machine is running.
7
Advertisement
Table of Contents
