BMW 3 Series Owner's Manual page 47

Hide thumbs Also See for 3 Series:
Table of Contents

Advertisement

Controls
Coupe: opening, closing
>
Press the switch to the resistance point:
The window opens as long as you press the
switch.
>
Press the switch beyond the resistance
point:
The window opens automatically. Press
the switch again to stop the opening
movement.
You can close the windows in the same manner
by pulling the switch.
Convertible: opening, closing
Individually
>
Press the switch to the resistance point:
The window opens as long as you press the
switch.
>
Press the switch beyond the resistance
point:
The window opens automatically. Press
the switch again to stop the opening
movement.
You can close the windows in the same manner
by pulling the switch. The rear windows do not
close automatically.
42
Opening and closing
Online Edition for Part no. 01402911383 - © 06/13 BMW AG
Jointly
>
Press the switch to the resistance point:
All windows open as long as you press the
switch.
>
Press the switch beyond the resistance
point:
All windows open automatically. Press
the switch again to stop the opening
movement.
>
Pull the switch:
All windows close as long as you pull the
switch.
After switching off the ignition
When the remote control is removed or the igni-
tion is switched off, you can still operate the
windows for approx. 1 minute as long as no
door is opened.
Convenient opening and closing
For information on Convenient opening and
closing via the remote control, refer to page 33.
For information on Convenient closing with
Comfort Access, refer to locking on page 34.
Pinch protection system
If the closing force exceeds a specific value as a
window closes, the closing action is interrupted
and the window reopens slightly.
Despite the pinch protection system
check and clear the window's travel path
prior to closing it; otherwise, the safety system
might fail to detect certain kinds of obstruc-
tions, such as thin objects, and the window
would continue closing.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

M3

Table of Contents