Toro groundmaster 7210 Operator's Manual page 34

1. Disengage the PTO, move the motion control
levers to the neutral locked position and set
the parking brake.
2. Move the throttle lever to the Slow position,
stop the engine, remove the key, and wait for
all moving parts to stop before leaving the
operating position.
3. Raise the front of the machine and support it
on jack stands.
4. Remove the fasteners securing each roller on
your mower deck and move the rollers up or
down as desired; refer to Figure 25 through
Figure 29 as applicable for your mower.
Figure 25
All Mower Decks
1. Front roller
Figure 26
Guardian Mower Decks Only
1. Bolt
2. Rear under-deck roller
3. Spacer
2. Roller shaft
4. Nut
5. Bracket
Figure 27
Guardian Mower Decks Only
1. Bolt
2. Front under-deck roller
Figure 28
Side-discharge Mower Decks Only
1. Bolt
2. Chute-side roller
3. Spacer
34
3. Nut
4. Bracket
4. Nut
5. Bracket