Canon MG3600 series Online Manual page 549

After making sure the FINE cartridge is installed properly, close the paper output cover.
If the problem is not resolved, remove the FINE cartridges and install them again.
For more on installing the FINE cartridges, see
• When copying, see also the sections below:
Is platen glass dirty?
Check6
Clean the platen glass.
Cleaning the Platen Glass and Document Cover
Make sure original is properly loaded on platen glass.
Check7
Loading Originals
Is original loaded with side to be copied facing down on platen glass?
Check8
Did you copy a printout done by this machine?
Check9
If you use a printout done by this machine as the original, print quality may be reduced depending on the
condition of the original.
Reprint from the computer if you can reprint from it.
Replacing a FINE Cartridge.
549