Panasonic SC-HT520 Operating Instructions Manual page 6

1
STEP
Front and surround speaker assembly
Make sure you have all the indicated components before starting the assembly, setup, and connection.
4 speaker units
4
Approx.
120 mm
1
2
1
Fit into groove.
≥You can attach the speakers directly to their bases (if you want to put them on shelves, for example).
∫ Preventing the speakers from falling over (Front and surround speakers)
4 black screws
4 clips
[Note]
Consult with a qualified housing contractor concerning the appropriate procedure when attaching to a concrete wall or a surface that may not
RQT7429 have strong enough support. Improper attachment may result in damage to the wall or speakers.
6
[HT878]
4 stands
Confirm screw
is securely
fastened.
2
3
Fit into groove.
Confirm screw
is securely
fastened.
Black screw
Clip
8 silver screws
4 bases
6
5
8
Position wire in
grooves as necessary,
7
Place into groove.
avoiding knots.
_:
Copper
4
`:
Silver
3
5
Place into groove.
String (not included)
Approx. 150 mm
4 speaker cables
≥2k4-m cables:
For front speakers
≥2k10-m cables:
For surround speakers
Assembled
_:
Copper
`:
Silver
Insert the
wire fully.
Wall
Screw eye (not included)