Chapter 5 - Using More Of Your Tv; Setting Up Your Favourite Channels; Energy Saving; Local Dimming - TCL U55S6806S Owner's Manual

Chapter 5 - Using more of your TV

Setting up your favourite channels

You can create a list of your favourite TV channels.
1. Press LIST.
2. Press the red button to enter Select channel
list, press / to select a list and press OK to
enter.
3. Press / / / to scroll through the channel
list and press the green button to add the selected
channel to your favourite list.
4. Repeat this procedure to set up other favourite
channels.
5. Press the red button to enter Select channel list,
select Favorites and press OK to enter.
6. Press / / / to select a channel, press OK
to watch it or press the green button to remove it
from your favourite list.
7. Press LIST or EXIT to exit.

Energy saving

1. Press MENU or OPTION on the remote control,
select Settings > Picture > ECO settings >
Energy saving and press OK/
2. Press / to select a desired power saving mode
and press OK to confirm.
3. Press EXIT or MENU to close the menu.

Local dimming

(* available only in selected models)
Your TV is equipped with local dimming technology
which increases local contrast and decreases power
consumption.
Follow the steps below to access the local dimming.
1. Press MENU or OPTION on the remote control,
select Settings > Picture > ECO settings > Local
dimming and press OK/
2. Press / to select On or Off and press OK to
confirm.
3. Press EXIT or MENU to close the menu.

Viewing TV using the 3D function

(* not available for some models)
WARNING:
• Some viewers may experience discomfort while
viewing 3D TV such as dizziness, nausea and
headaches. If you experience any such symptom, stop
viewing 3D TV, remove your 3D glasses and rest.
• Watching 3D videos too closely or for a long period
of time may harm your eyesight.
• A responsible adult should frequently check on
children who are using the 3D function.
• Do not use the 3D glasses for any other purpose
than viewing 3D videos on a 3D TV.
• Do not use the 3D function or 3D glasses while
walking or moving around, otherwise this may result
to enter.
to enter.
EN 11
in injuries due to running into objects, tripping, and/
or falling.
1. Press MENU or OPTION on the remote control,
select Settings > Picture > 3D navigation, and
press OK/ to enter. Press
and press OK to confirm.
2. Press / to select 3D in the Picture menu
and press OK/ to enter.
3. Wear the 3D glasses first, then select 3D Mode
and press OK/ to enter. Press
desired 3D input format for the playing of 3D video
and press OK to confirm.
4. Press / to select other menu options:
- 3D-to-2D: Select On to display 3D image in 2D
mode (no 3D effect).
- L-R switch: Select On or Off to adjust the 3D
video between the left and right eyes for better
3D viewing.
- Depth of field: This option is available only in
3D mode. You can adjust it to achieve a good 3D
effect with the image.
5. Press EXIT or MENU to close the menu.
Notes:
- 3D glasses from other manufacturers may not be
supported.
- All photo functions are disabled in 3D mode.
- If you change to a different signal source
or access Smart TV, the 3D mode will be
automatically disabled.
- Some 3D modes may not be available depending
on the input format of the 3D video source.
- Supported 3D modes:
Analogue TV, AV: 2D-to-3D
Digital TV, CMP, HDMI, USB, Videos from the
Internet: 2D-to-3D, Side-by-Side, Top-and-
Bottom, Line interleave.
- 3D function in USB mode: During the playback
of a selected video from USB, press OPTION to
display the video menu in the browser mode, then
select 3D mode. For more detail information,
refer to the above related descriptions.

SPDIF type

Connect the TV to an audio device through the SPDIF
output. To select a proper sound type for your SPDIF
output, press MENU or OPTION on the remote
control, select Settings > Sound > SPDIF type and
press OK/ to enter. Press
option and press OK to confirm.
- If you select Auto, the SPDIF output format is
• Dolby Digital when the programme's sound format
is Dolby Digital or Dolby Digital Plus or HE-AAC.
• PCM when the programme's sound format is
MPEG.
- If you select PCM, the SPDIF output format is PCM,
regardless of the programme's sound format.
/ to select Manual
/ to select the
/ to select an