Panasonic AJ-SD930BE Operating Instructions Manual page 42

CONTENTS
Setup menus
USER menu
<EDIT>
No./Item
309 The same type of setting as setup menu No.
305. This selects the channel concerned when
EDIT RPLCEC the CUE edit preset is set in compliance with
the ON or OFF presetting for the analogue
audio signals designated by the controller.
0000 N-DEF :
Not set.
0001 CH1 :
Compliance with analogue CH1 edit preset.
0002 CH2 :
Compliance with analogue CH2 edit preset.
0003 CH1+2 :
Compliance with either analogue CH1 or CH2
edit preset.
310 This selects whether to conduct simultaneous
playback while editing is in progress.
CONFI EDIT
0000 OFF : No simultaneous playback
0001 ON : Simultaneous playback
<Note>
Simultaneous playback is valid when the MODE
switch is set to TAPE.
311 This selects the connection method for the
digital audio edit IN point.
AUD EDIT IN
0000 CUT : Cut processing
0001 FADE : V Fade processing
312 This selects the connection method for the
digital audio edit OUT point.
AUD EDIT
OUT 0000 CUT : Cut processing
0001 FADE : V Fade processing
313 SD955B This selects whether the IN point is to be
entered using the PREROLL button when it
AUTO ENTRY has not been entered.
0000 DIS : IN point is not entered.
0001 ENA : IN point is entered.
314 SD955B This selects the CF adjustment deck with
deck-to-deck editing.
CF ADJ SEL
0000 PLAYER :
The player's edit IN/OUT points are adjusted.
(reference as the RECORDER side)
0001 RECORD :
The recorder's edit IN/OUT points are
adjusted. (reference as the PLAYER side)
315 This selects the mode after cue-up operation
is complete.
AFTER
CUE-UP 0000 STOP : STOP mode
0001 STILL : SHTL STILL mode
0002 STILL2 : SLOW STILL mode
The underlined items indicates the initial setting.
42 (E)
Description No./Item
320 This sets the maximum SLOW FWD speed.
VAR FWD 0000 +4.1 : +4.1 (+3.1)a speed
MAX 0001 +1.85 : +1.85a speed
0002 +1 : +1a speed
<Notes>
OThe value for the DV/DVCAM tape is shown in
parenthesis (
OAt any speed setting other than +4.1, the
phase cannot be synchronized from the editing
controller.
321 This sets the maximum SLOW REV speed.
VAR REV MAX 0000 –4.1 : –4.1 (–3.1)a speed
0001 –1.85 : –1.85a speed
0002 –1 : –1a speed
0003 –0.43 : –0.43a speed
<Note>
The value for the DV/DVCAM tape is shown in
parenthesis (
323 This sets the maximum JOG FWD speed.
JOG FWD 0000 +4.1 : +4.1 (+3.1)a speed
MAX 0001 +1.85 : +1.85a speed
0002 +1 : +1a speed
<Notes>
OThe value for the DV/DVCAM tape is shown in
parenthesis (
OThe maximum speed is set to +1a when the
dial on the front panel is operated.
OAt any speed setting other than +4.1, the
phase cannot be synchronized from an editing
controller which synchronizes the phase using
the JOG command.
324 This sets the maximum JOG REV speed.
JOG REV MAX 0000 –4.1 : –4.1 (–3.1)a speed
0001 –1.85 : –1.85a speed
0002 –1 : –1a speed
0003 –0.43 : –0.43 (–0.5)a speed
<Notes>
OThe value for the DV/DVCAM tape is shown in
parenthesis (
OThe maximum speed is set to –1a when the
dial on the front panel is operated.
325 This sets the postroll time.
SD955B
Any time from 0 to 5 seconds can be set in 1-
POSTROLL second units.
TM
0000 0s
0001 1s
0002 2s
0003 3s
0004 4s
0005 5s
Description
).
).
).
).