Panasonic AJ-SD930BE Operating Instructions Manual page 13

CONTENTS
Parts and their functions
Display panel
: EDIT, EDIT REC, REC and REC INH lamps
EDIT:
This lights when an editing mode has been
selected.
EDIT REC:
This lights when the edit recording mode has
been established.
REC:
This lights when the recording mode has been
established.
REC INH:
This lights in the recording inhibit status (when
the REC INH switch at the bottom front panel is
set to ON or the cassette is in the accidental
erasure prevention status).
In this status, recording and editing are not
possible.
Whether the REC INH lamp is to light or flash
when recording has been inhibited by the
accidental erasure prevention tab on the
cassette tape can be selected using setup menu
No. 114 (REC INH LAMP).
; Tape transport displays
The tape transport status is displayed here.
: Normal playback or recording
: Playback at a speed slower than 1a
: Playback at a speed faster than 1a
: Fast forwarding (FF)
: Playback in the reverse direction at 1a
: Playback in the reverse direction at a speed
slower than 1a
: Playback in the reverse direction at a speed
faster than 1a
: Rewinding (REW)
: Pause/still
< Format displays
The recording format and the format of the tape
inserted in the unit are displayed here.
525 625 WIDE REMOTE VIDEO
Y PB PR
dB dB dB dB
0 0 0 0 CUE CMPST
dB
-4 -4 -4 -4
-8 -8 -8 -8 -8 SDI
SDTI/1394
-12 -12 -12 -12 -12
SG 1 2
-16 -16 -16 -16 -16
-20 -20 -20 -20 -20
-25 -25 -25 -25 -25
CTL
-30 -30 -30 -30 -30
TC
- - - - -
UB
L R L R L R L R L R
>
SCH SERVO
AUDIO
=
ANALOG
U :
EDIT REC INH
AES/EBU
USER SET
DVCPRO
SDI
50
;
SDTI/1394
DVCAM
SG
<
=
= Counter display
The tape counter, time code, etc. are displayed
here.
The type of value displayed is indicated by CTL, TC
or UB.
> Level meters
These meters indicate the levels of the CH1, CH2,
CH3, CH4 and CUE tracks of the PCM audio
signals.
During recording or while E-E is selected, the levels
of the audio input signals appear; during playback,
the levels of the audio output signals appear.
Using the METER selector button L, the audio
level display is switched from the FULL mode to the
FINE mode or vice versa. (See page 9)
FULL mode
dB
Reference level
0
(–18 dB)
-4
-8
-12
-16
-20
-25
-30
-
L R
FINE mode
L R
Each of the dots (O) indicates
a 1 dB scale increment.
13 (E)